SUPPORT THE WORK

# GetWiki

### second law of thermodynamics

ARTICLE SUBJECTS
news  →
unix  →
wiki  →
ARTICLE TYPES
feed  →
help  →
wiki  →
ARTICLE ORIGINS
second law of thermodynamics
[ temporary import ]
- the content below is remote from Wikipedia
- it has been imported raw for GetWiki
{{Thermodynamics|laws}}The second law of thermodynamics states that the total entropy of an isolated system can never decrease over time. The total entropy of a system and its surroundings can remain constant in ideal cases where the system is in thermodynamic equilibrium, or is undergoing a (fictive) reversible process. In all processes that occur, including spontaneous processes,Atkins and de Paula, p.78 the total entropy of the system and its surroundings increases and the process is irreversible in the thermodynamic sense. The increase in entropy accounts for the irreversibility of natural processes, and the asymmetry between future and past.BOOK, Zohuri, Bahman, Dimensional Analysis Beyond the Pi Theorem,weblink 2016, Springer, 978-3-319-45726-0, 111, Historically, the second law was an empirical finding that was accepted as an axiom of thermodynamic theory. Statistical mechanics, classical or quantum, explains the microscopic origin of the law.The second law has been expressed in many ways. Its first formulation is credited to the French scientist Sadi Carnot, who in 1824 showed that there is an upper limit to the efficiency of conversion of heat to work, in a heat engine, also referred to as Carnot's rule or limit.

## Introduction

(File:Heat flow hot to cold.png|thumb|Heat flow from hot water to cold water.)The first law of thermodynamics provides the basic definition of internal energy, associated with all thermodynamic systems, and states the rule of conservation of energy.Planck, M. (1897/1903), pp. 40â€“41.Munster A. (1970), pp. 8â€“9, 50â€“51. The second law is concerned with the direction of natural processes.{{harvnb|Mandl|1988}} It asserts that a natural process runs only in one sense, and is not reversible. For example, heat always flows spontaneously from hotter to colder bodies, and never the reverse, unless external work is performed on the system. The explanation of the phenomena was given in terms of entropy.Planck, M. (1897/1903), pp. 79â€“107.Bailyn, M. (1994), Section 71, pp. 113â€“154. Total entropy (S) can never decrease over time for an isolated system because the entropy of an isolated system spontaneously evolves toward thermodynamic equilibrium: the entropy should stay the same or increase.In a fictive reversible process, an infinitesimal increment in the entropy ({{math|dS}}) of a system is defined to result from an infinitesimal transfer of heat ({{math|Î´Q}}) to a closed system (which allows the entry or exit of energy â€“ but not mass transfer) divided by the common temperature ({{math|T}}) of the system in equilibrium and the surroundings which supply the heat:Bailyn, M. (1994), p. 120.
mathrm dS = frac{delta Q}{T} ,, ,,,,,,,,,,,,,,,,,,,,, text {(closed system, idealized fictive reversible process)}.
Different notations are used for infinitesimal amounts of heat ({{mvar|Î´}}) and infinitesimal amounts of entropy ({{mvar|d}}) because entropy is a function of state, while heat, like work, is not. For an actually possible infinitesimal process without exchange of mass with the surroundings, the second law requires that the increment in system entropy fulfills the inequality Mortimer, R. G. Physical Chemistry. 3rd ed., p. 120, Academic Press, 2008. Fermi, E. Thermodynamics, footnote on p. 48, Dover Publications,1956 (still in print).
mathrm dS > frac{delta Q}{T_{surr}} ,, ,,,,,,,,,,,,,,,,,,,,, text {(closed system, actually possible, irreversible process).}
This is because a general process for this case may include work being done on the system by its surroundings, which can have frictional or viscous effects inside the system, because a chemical reaction may be in progress, or because heat transfer actually occurs only irreversibly, driven by a finite difference between the system temperature ({{math|T}}) and the temperature of the surroundings ({{math|T}}surr).Adkins, C.J. (1968/1983), p. 75. Note that the equality still applies for pure heat flow, Schmidt-Rohr, K. (2014). "Expansion Work without the External Pressure, and Thermodynamics in Terms of Quasistatic Irreversible Processes" J. Chem. Educ. 91: 402-409. weblink
mathrm dS = frac{delta Q}{T} ,, ,,,,,,,,,,,,,,,,,,,,, text {(actually possible quasistatic irreversible process without composition change).}
which is the basis of the accurate determination of the absolute entropy of pure substances from measured heat capacity curves and entropy changes at phase transitions, i.e. by calorimetry.Oxtoby, D. W; Gillis, H.P., Butler, L. J. (2015).Principles of Modern Chemistry, Brooks Cole. p. 617. {{ISBN|978-1305079113}} Introducing a set of internal variables xi to describe the deviation of a thermodynamic system in physical equilibrium (with the required well-defined uniform pressure P and temperature T) from the chemical equilibrium state, one can record the equality
mathrm dS = frac{delta Q}{T} - frac{1}{T} sum_{j} , Xi_{j} ,delta xi_j ,, ,,,,,,,,,,,,,,,,,,,,, text {(closed system, actually possible quasistatic irreversible process).}
The second term represents work of internal variables that can be perturbed by external influences, but the system cannot perform any positive work via internal variables. This statement introduces the impossibility of the reversion of evolution of the thermodynamic system in time and can be considered as a formulation of the second principle of thermodynamics â€“ the formulation, which is, of course, equivalent to the formulation of the principle in terms of entropy. Pokrovskii V.N. (2005) Extended thermodynamics in a discrete-system approach, Eur. J. Phys. vol. 26, 769â€“781.JOURNAL, 10.1155/2013/906136, A Derivation of the Main Relations of Nonequilibrium Thermodynamics, ISRN Thermodynamics, 2013, 1â€“9, 2013, Pokrovskii, Vladimir N.,
The zeroth law of thermodynamics in its usual short statement allows recognition that two bodies in a relation of thermal equilibrium have the same temperature, especially that a test body has the same temperature as a reference thermometric body.BOOK, J. S. Dugdale, Entropy and its Physical Meaning, Taylor & Francis, 1996, 978-0-7484-0569-5, 13, This law is the basis of temperature., For a body in thermal equilibrium with another, there are indefinitely many empirical temperature scales, in general respectively depending on the properties of a particular reference thermometric body. The second law allows{{how?|date=August 2018}} a distinguished temperature scale, which defines an absolute, thermodynamic temperature, independent of the properties of any particular reference thermometric body.Zemansky, M.W. (1968), pp. 207â€“209.Quinn, T.J. (1983), p. 8.

## Various statements of the law

The second law of thermodynamics may be expressed in many specific ways,WEB, Concept and Statements of the Second Law,weblink 2010-10-07, web.mit.edu, the most prominent classical statements{{sfnp|Lieb|Yngvason|1999}} being the statement by Rudolf Clausius (1854), the statement by Lord Kelvin (1851), and the statement in axiomatic thermodynamics by Constantin CarathÃ©odory (1909). These statements cast the law in general physical terms citing the impossibility of certain processes. The Clausius and the Kelvin statements have been shown to be equivalent.{{sfnp|Rao|2004|p=213}}

### Carnot's principle

The historical origin of the second law of thermodynamics was in Carnot's principle. It refers to a cycle of a Carnot heat engine, fictively operated in the limiting mode of extreme slowness known as quasi-static, so that the heat and work transfers are between subsystems that are always in their own internal states of thermodynamic equilibrium. The Carnot engine is an idealized device of special interest to engineers who are concerned with the efficiency of heat engines. Carnot's principle was recognized by Carnot at a time when the caloric theory of heat was seriously considered, before the recognition of the first law of thermodynamics, and before the mathematical expression of the concept of entropy. Interpreted in the light of the first law, it is physically equivalent to the second law of thermodynamics, and remains valid today. In concise terms, Carnot's original statement was made from the viewpoint of the caloric theory, before the discovery of the first law of thermodynamics:
The production of motive power is due ... not to any real consumption of caloric, but to its transport from a warm body to a cold body ...Lavenda, B.H. (2010). A New Perspective on Thermodynamics, Springer, New York, {{ISBN|978-1-4419-1429-3}}, page 20.
In modern terms, Carnot's principle may be stated more elaborately:
The efficiency of a quasi-static or reversible Carnot cycle depends only on the temperatures of the two heat reservoirs, and is the same, whatever the working substance. A Carnot engine operated in this way is the most efficient possible heat engine using those two temperatures.Carnot, S. (1824/1986).Truesdell, C. (1980), Chapter 5.Adkins, C.J. (1968/1983), pp. 56â€“58.MÃ¼nster, A. (1970), p. 11.Kondepudi, D., Prigogine, I. (1998), pp.67â€“75.Lebon, G., Jou, D., Casas-VÃ¡zquez, J. (2008), p. 10.Eu, B.C. (2002), pp. 32â€“35.

### Clausius statement

The German scientist Rudolf Clausius laid the foundation for the second law of thermodynamics in 1850 by examining the relation between heat transfer and work.{{sfnp|Clausius|1850}} His formulation of the second law, which was published in German in 1854, is known as the Clausius statement:Heat can never pass from a colder to a warmer body without some other change, connected therewith, occurring at the same time.{{sfnp|Clausius|1854|p=86}}The statement by Clausius uses the concept of 'passage of heat'. As is usual in thermodynamic discussions, this means 'net transfer of energy as heat', and does not refer to contributory transfers one way and the other.Heat cannot spontaneously flow from cold regions to hot regions without external work being performed on the system, which is evident from ordinary experience of refrigeration, for example. In a refrigerator, heat flows from cold to hot, but only when forced by an external agent, the refrigeration system.

### Kelvin statement

Lord Kelvin expressed the second law as
It is impossible, by means of inanimate material agency, to derive mechanical effect from any portion of matter by cooling it below the temperature of the coldest of the surrounding objects.{{sfnp|Thomson|1851}}

### Equivalence of the Clausius and the Kelvin statements

thumb|300px|Derive Kelvin Statement from Clausius StatementSuppose there is an engine violating the Kelvin statement: i.e., one that drains heat and converts it completely into work in a cyclic fashion without any other result. Now pair it with a reversed Carnot engine as shown by the figure. The net and sole effect of this newly created engine consisting of the two engines mentioned is transferring heat Delta Q=Qleft(frac{1}{eta}-1right) from the cooler reservoir to the hotter one, which violates the Clausius statement(This is a consequence of the first law of thermodynamics, as for the total system's energy to remain the same, text{Input}+text{Output}=0 implies Q+frac{Q}{eta} = -Q_c , so therefore Q_c=Qleft( frac{1}{eta}-1right) ). Thus a violation of the Kelvin statement implies a violation of the Clausius statement, i.e. the Clausius statement implies the Kelvin statement. We can prove in a similar manner that the Kelvin statement implies the Clausius statement, and hence the two are equivalent.

### Planck's proposition

Planck offered the following proposition as derived directly from experience. This is sometimes regarded as his statement of the second law, but he regarded it as a starting point for the derivation of the second law.
It is impossible to construct an engine which will work in a complete cycle, and produce no effect except the raising of a weight and cooling of a heat reservoir.Planck, M. (1897/1903), p. 86.Roberts, J.K., Miller, A.R. (1928/1960), p. 319.

### Relation between Kelvin's statement and Planck's proposition

It is almost customary in textbooks to speak of the "Kelvin-Planck statement" of the law, as for example in the text by ter Haar and Wergeland.ter Haar, D., Wergeland, H. (1966), p. 17.The Kelvinâ€“Planck statement (or the heat engine statement) of the second law of thermodynamics states that
It is impossible to devise a cyclically operating device, the sole effect of which is to absorb energy in the form of heat from a single thermal reservoir and to deliver an equivalent amount of work.BOOK, Rao, Y. V. C., Chemical Engineering Thermodynamics, Universities Press, 978-81-7371-048-3, 158, 1997,

### Planck's statement

Planck stated the second law as follows.
Every process occurring in nature proceeds in the sense in which the sum of the entropies of all bodies taking part in the process is increased. In the limit, i.e. for reversible processes, the sum of the entropies remains unchanged.Planck, M. (1897/1903), p. 100.Planck, M. (1926), p. 463, translation by Uffink, J. (2003), p. 131.Roberts, J.K., Miller, A.R. (1928/1960), p. 382. This source is partly verbatim from Planck's statement, but does not cite Planck. This source calls the statement the principle of the increase of entropy.
Rather like Planck's statement is that of Uhlenbeck and Ford for irreversible phenomena.
... in an irreversible or spontaneous change from one equilibrium state to another (as for example the equalization of temperature of two bodies A and B, when brought in contact) the entropy always increases.Uhlenbeck, G.E., Ford, G.W. (1963), p. 16.

Constantin CarathÃ©odory formulated thermodynamics on a purely mathematical axiomatic foundation. His statement of the second law is known as the Principle of CarathÃ©odory, which may be formulated as follows:CarathÃ©odory, C. (1909).In every neighborhood of any state S of an adiabatically enclosed system there are states inaccessible from S.Buchdahl, H.A. (1966), p. 68.With this formulation, he described the concept of adiabatic accessibility for the first time and provided the foundation for a new subfield of classical thermodynamics, often called geometrical thermodynamics. It follows from CarathÃ©odory's principle that quantity of energy quasi-statically transferred as heat is a holonomic process function, in other words, delta Q=TdS.BOOK, Sychev, V. V., The Differential Equations of Thermodynamics, 1991, Taylor & Francis, 978-1-56032-121-7, {{clarify|date=February 2014}}Though it is almost customary in textbooks to say that CarathÃ©odory's principle expresses the second law and to treat it as equivalent to the Clausius or to the Kelvin-Planck statements, such is not the case. To get all the content of the second law, CarathÃ©odory's principle needs to be supplemented by Planck's principle, that isochoric work always increases the internal energy of a closed system that was initially in its own internal thermodynamic equilibrium.MÃ¼nster, A. (1970), p. 45.{{sfnp|Lieb|Yngvason|1999|p=49}}Planck, M. (1926).Buchdahl, H.A. (1966), p. 69. {{clarify|date=February 2014}}

### Planck's principle

In 1926, Max Planck wrote an important paper on the basics of thermodynamics.Uffink, J. (2003), pp. 129â€“132. He indicated the principle
The internal energy of a closed system is increased by an adiabatic process, throughout the duration of which, the volume of the system remains constant.{{sfnp |Lieb|Yngvason|1999|p=49}}
This formulation does not mention heat and does not mention temperature, nor even entropy, and does not necessarily implicitly rely on those concepts, but it implies the content of the second law. A closely related statement is that "Frictional pressure never does positive work."Truesdell, C., Muncaster, R.G. (1980). Fundamentals of Maxwell's Kinetic Theory of a Simple Monatomic Gas, Treated as a Branch of Rational Mechanics, Academic Press, New York, {{ISBN|0-12-701350-4}}, p. 15. Using a now-obsolete form of words, Planck himself wrote: "The production of heat by friction is irreversible."Planck, M. (1897/1903), p. 81.Planck, M. (1926), p. 457, Wikipedia editor's translation.Not mentioning entropy, this principle of Planck is stated in physical terms. It is very closely related to the Kelvin statement given just above.Lieb, E.H., Yngvason, J. (2003), p. 149. It is relevant that for a system at constant volume and mole numbers, the entropy is a monotonic function of the internal energy. Nevertheless, this principle of Planck is not actually Planck's preferred statement of the second law, which is quoted above, in a previous sub-section of the present section of this present article, and relies on the concept of entropy.A statement that in a sense is complementary to Planck's principle is made by Borgnakke and Sonntag. They do not offer it as a full statement of the second law:
... there is only one way in which the entropy of a [closed] system can be decreased, and that is to transfer heat from the system.Borgnakke, C., Sonntag., R.E. (2009), p. 304.
Differing from Planck's just foregoing principle, this one is explicitly in terms of entropy change. Removal of matter from a system can also decrease its entropy.

### Statement for a system that has a known expression of its internal energy as a function of its extensive state variables

The second law has been shown to be equivalent to the internal energy U being a weakly convex function, when written as a function of extensive properties (mass, volume, entropy, ...).BOOK, van Gool, W., Bruggink, J.J.C. (Eds), Energy and time in the economic and physical sciences, North-Holland, 1985, 41â€“56, 978-0-444-87748-2, JOURNAL, GrubbstrÃ¶m, Robert W., 10.1016/j.apenergy.2007.01.003, An Attempt to Introduce Dynamics Into Generalised Exergy Considerations, Applied Energy, 84, 7â€“8, 701â€“718, 2007, {{clarify|date=February 2014}}

## Corollaries

### Perpetual motion of the second kind

Before the establishment of the second law, many people who were interested in inventing a perpetual motion machine had tried to circumvent the restrictions of first law of thermodynamics by extracting the massive internal energy of the environment as the power of the machine. Such a machine is called a "perpetual motion machine of the second kind". The second law declared the impossibility of such machines.

### Carnot theorem

Carnot's theorem (1824) is a principle that limits the maximum efficiency for any possible engine. The efficiency solely depends on the temperature difference between the hot and cold thermal reservoirs. Carnot's theorem states:
• All irreversible heat engines between two heat reservoirs are less efficient than a Carnot engine operating between the same reservoirs.
• All reversible heat engines between two heat reservoirs are equally efficient with a Carnot engine operating between the same reservoirs.
In his ideal model, the heat of caloric converted into work could be reinstated by reversing the motion of the cycle, a concept subsequently known as thermodynamic reversibility. Carnot, however, further postulated that some caloric is lost, not being converted to mechanical work. Hence, no real heat engine could realise the Carnot cycle's reversibility and was condemned to be less efficient.Though formulated in terms of caloric (see the obsolete caloric theory), rather than entropy, this was an early insight into the second law.

### Clausius inequality

The Clausius theorem (1854) states that in a cyclic process
oint frac{delta Q}{T} leq 0.
The equality holds in the reversible caseClausius theorem at Wolfram Research and the strict inequality holds in the irreversible case. The reversible case is used to introduce the state function entropy. This is because in cyclic processes the variation of a state function is zero from state functionality.

### Thermodynamic temperature

For an arbitrary heat engine, the efficiency is:
eta = frac {W_n}{q_H} = frac{q_H-q_C}{q_H} = 1 - frac{q_C}{q_H} qquad (1)
where Wn is for the net work done per cycle. Thus the efficiency depends only on qC/qH.Carnot's theorem states that all reversible engines operating between the same heat reservoirs are equally efficient.Thus, any reversible heat engine operating between temperatures T1 and T2 must have the same efficiency, that is to say, the efficiency is the function of temperatures only: frac{q_C}{q_H} = f(T_H,T_C)qquad (2).In addition, a reversible heat engine operating between temperatures T1 and T3 must have the same efficiency as one consisting of two cycles, one between T1 and another (intermediate) temperature T2, and the second between T2 andT3. This can only be the case if
f(T_1,T_3) = frac{q_3}{q_1} = frac{q_2 q_3} {q_1 q_2} = f(T_1,T_2)f(T_2,T_3).Now consider the case where T_1 is a fixed reference temperature: the temperature of the triple point of water. Then for any T2 and T3,
f(T_2,T_3) = frac{f(T_1,T_3)}{f(T_1,T_2)} = frac{273.16 cdot f(T_1,T_3)}{273.16 cdot f(T_1,T_2)}.
Therefore, if thermodynamic temperature is defined by
T = 273.16 cdot f(T_1,T) ,
then the function f, viewed as a function of thermodynamic temperature, is simply
f(T_2,T_3) = frac{T_3}{T_2},
and the reference temperature T1 will have the value 273.16. (Any reference temperature and any positive numerical value could be used{{snd}}the choice here corresponds to the Kelvin scale.)

### Entropy

According to the Clausius equality, for a reversible process
oint frac{delta Q}{T}=0
That means the line integral int_L frac{delta Q}{T} is path independent for reversible processes.So we can define a state function S called entropy, which for a reversible process or for pure heat transfer satisfies
dS = frac{delta Q}{T} !
With this we can only obtain the difference of entropy by integrating the above formula. To obtain the absolute value, we need the third law of thermodynamics, which states that S = 0 at absolute zero for perfect crystals.For any irreversible process, since entropy is a state function, we can always connect the initial and terminal states with an imaginary reversible process and integrating on that path to calculate the difference in entropy.Now reverse the reversible process and combine it with the said irreversible process. Applying the Clausius inequality on this loop,
-Delta S+intfrac{delta Q}{T}=ointfrac{delta Q}{T}< 0
Thus,
Delta S ge int frac{delta Q}{T} ,!
where the equality holds if the transformation is reversible.Notice that if the process is an adiabatic process, then delta Q=0, so Delta Sge 0.

### Energy, available useful work

{{See also|Exergy}}An important and revealing idealized special case is to consider applying the Second Law to the scenario of an isolated system (called the total system or universe), made up of two parts: a sub-system of interest, and the sub-system's surroundings. These surroundings are imagined to be so large that they can be considered as an unlimited heat reservoir at temperature TR and pressure PR {{snd}}so that no matter how much heat is transferred to (or from) the sub-system, the temperature of the surroundings will remain TR; and no matter how much the volume of the sub-system expands (or contracts), the pressure of the surroundings will remain PR.Whatever changes to dS and dSR occur in the entropies of the sub-system and the surroundings individually, according to the Second Law the entropy Stot of the isolated total system must not decrease:
dS_{mathrm{tot}}= dS + dS_R ge 0
According to the first law of thermodynamics, the change dU in the internal energy of the sub-system is the sum of the heat Î´q added to the sub-system, less any work Î´w done by the sub-system, plus any net chemical energy entering the sub-system d âˆ‘Î¼iRNi, so that:
dU = delta q - delta w + d(sum mu_{iR}N_i) ,
where Î¼iR are the chemical potentials of chemical species in the external surroundings.Now the heat leaving the reservoir and entering the sub-system is
delta q = T_R (-dS_R) le T_R dS
where we have first used the definition of entropy in classical thermodynamics (alternatively, in statistical thermodynamics, the relation between entropy change, temperature and absorbed heat can be derived); and then the Second Law inequality from above.It therefore follows that any net work Î´w done by the sub-system must obey
delta w le - dU + T_R dS + sum mu_{iR} dN_i ,
It is useful to separate the work Î´w done by the subsystem into the useful work Î´wu that can be done by the sub-system, over and beyond the work pR dV done merely by the sub-system expanding against the surrounding external pressure, giving the following relation for the useful work (exergy) that can be done:
delta w_u le -d (U - T_R S + p_R V - sum mu_{iR} N_i ),
It is convenient to define the right-hand-side as the exact derivative of a thermodynamic potential, called the availability or exergy E of the subsystem,
E = U - T_R S + p_R V - sum mu_{iR} N_i
The Second Law therefore implies that for any process which can be considered as divided simply into a subsystem, and an unlimited temperature and pressure reservoir with which it is in contact,
dE + delta w_u le 0 ,
i.e. the change in the subsystem's exergy plus the useful work done by the subsystem (or, the change in the subsystem's exergy less any work, additional to that done by the pressure reservoir, done on the system) must be less than or equal to zero.In sum, if a proper infinite-reservoir-like reference state is chosen as the system surroundings in the real world, then the Second Law predicts a decrease in E for an irreversible process and no change for a reversible process.
dS_{tot} ge 0 Is equivalent to dE + delta w_u le 0
This expression together with the associated reference state permits a design engineer working at the macroscopic scale (above the thermodynamic limit) to utilize the Second Law without directly measuring or considering entropy change in a total isolated system. (Also, see process engineer). Those changes have already been considered by the assumption that the system under consideration can reach equilibrium with the reference state without altering the reference state. An efficiency for a process or collection of processes that compares it to the reversible ideal may also be found (See second law efficiency.)This approach to the Second Law is widely utilized in engineering practice, environmental accounting, systems ecology, and other disciplines.

### The second law in chemical thermodynamics

For a spontaneous chemical process in a closed system at constant temperature and pressure without non-PV work, the Clausius inequality Î”S > Q/Tsurr transforms into a condition for the change in Gibbs free energy
Delta G < 0
or dG < 0. For a similar process at constant temperature and volume, the change in Helmholtz free energy must be negative, Delta A < 0 . Thus, a negative value of the change in free energy (G or A) is a necessary condition for a process to be spontaneous. This is the most useful form of the second law of thermodynamics in chemistry, where free-energy changes can be calculated from tabulated enthalpies of formation and standard molar entropies of reactants and products. The chemical equilibrium condition at constant T and p without electrical work is dG = 0.

## History

### Account given by Clausius

(File:Clausius-1.jpg|thumb|upright|Rudolf Clausius)In 1856, the German physicist Rudolf Clausius stated what he called the "second fundamental theorem in the mechanical theory of heat" in the following form:{{sfnp|Clausius|1867}}
int frac{delta Q}{T} = -N
where Q is heat, T is temperature and N is the "equivalence-value" of all uncompensated transformations involved in a cyclical process. Later, in 1865, Clausius would come to define "equivalence-value" as entropy. On the heels of this definition, that same year, the most famous version of the second law was read in a presentation at the Philosophical Society of Zurich on April 24, in which, in the end of his presentation, Clausius concludes:The entropy of the universe tends to a maximum.This statement is the best-known phrasing of the second law. Because of the looseness of its language, e.g. universe, as well as lack of specific conditions, e.g. open, closed, or isolated, many people take this simple statement to mean that the second law of thermodynamics applies virtually to every subject imaginable. This is not true; this statement is only a simplified version of a more extended and precise description.In terms of time variation, the mathematical statement of the second law for an isolated system undergoing an arbitrary transformation is:
frac{dS}{dt} ge 0
where
S is the entropy of the system and t is time.
The equality sign applies after equilibration. An alternative way of formulating of the second law for isolated systems is:
frac{dS}{dt} = dot S_{i} with dot S_{i} ge 0
with dot S_{i} the sum of the rate of entropy production by all processes inside the system. The advantage of this formulation is that it shows the effect of the entropy production. The rate of entropy production is a very important concept since it determines (limits) the efficiency of thermal machines. Multiplied with ambient temperature T_{a} it gives the so-called dissipated energy P_{diss}=T_{a}dot S_{i}.The expression of the second law for closed systems (so, allowing heat exchange and moving boundaries, but not exchange of matter) is:
frac{dS}{dt} = frac{dot Q}{T}+dot S_{i} with dot S_{i} ge 0
Here
dot Q is the heat flow into the system T is the temperature at the point where the heat enters the system.
The equality sign holds in the case that only reversible processes take place inside the system. If irreversible processes take place (which is the case in real systems in operation) the >-sign holds. If heat is supplied to the system at several places we have to take the algebraic sum of the corresponding terms.For open systems (also allowing exchange of matter):
frac{dS}{dt} = frac{dot Q}{T}+dot S+dot S_{i} with dot S_{i} ge 0
Here dot S is the flow of entropy into the system associated with the flow of matter entering the system. It should not be confused with the time derivative of the entropy. If matter is supplied at several places we have to take the algebraic sum of these contributions.

## Statistical mechanics

Statistical mechanics gives an explanation for the second law by postulating that a material is composed of atoms and molecules which are in constant motion. A particular set of positions and velocities for each particle in the system is called a microstate of the system and because of the constant motion, the system is constantly changing its microstate. Statistical mechanics postulates that, in equilibrium, each microstate that the system might be in is equally likely to occur, and when this assumption is made, it leads directly to the conclusion that the second law must hold in a statistical sense. That is, the second law will hold on average, with a statistical variation on the order of 1/{{radic|N}} where N is the number of particles in the system. For everyday (macroscopic) situations, the probability that the second law will be violated is practically zero. However, for systems with a small number of particles, thermodynamic parameters, including the entropy, may show significant statistical deviations from that predicted by the second law. Classical thermodynamic theory does not deal with these statistical variations.

## Derivation from statistical mechanics

{{Further information|H-theorem}}The first mechanical argument of the Kinetic theory of gases that molecular collisions entail an equalization of temperatures and hence a tendency towards equilibrium was due to James Clerk Maxwell in 1860;JOURNAL, Gyenis, Balazs, 10.1016/j.shpsb.2017.01.001, Maxwell and the normal distribution: A colored story of probability, independence, and tendency towards equilibrium, Studies in History and Philosophy of Modern Physics, 57, 53â€“65, 2017, 1702.01411, 2017SHPMP..57...53G, Ludwig Boltzmann with his H-theorem of 1872 also argued that due to collisions gases should over time tend toward the Maxwell-Boltzmann distribution.Due to Loschmidt's paradox, derivations of the Second Law have to make an assumption regarding the past, namely that the system is uncorrelated at some time in the past; this allows for simple probabilistic treatment. This assumption is usually thought as a boundary condition, and thus the second Law is ultimately a consequence of the initial conditions somewhere in the past, probably at the beginning of the universe (the Big Bang), though other scenarios have also been suggested.JOURNAL, Hawking, SW, Arrow of time in cosmology, Phys. Rev. D, 1985, 32, 10, 2489â€“2495, 10.1103/PhysRevD.32.2489, 1985PhRvD..32.2489H, BOOK, Greene, Brian, Brian Greene, The Fabric of the Cosmos, Alfred A. Knopf, 2004, 171, 978-0-375-41288-2, JOURNAL, Lebowitz, Joel L., Boltzmann's Entropy and Time's Arrow, Physics Today, September 1993, 46, 9, 32â€“38,weblink 2013-02-22, 10.1063/1.881363, 1993PhT....46i..32L, Given these assumptions, in statistical mechanics, the Second Law is not a postulate, rather it is a consequence of the fundamental postulate, also known as the equal prior probability postulate, so long as one is clear that simple probability arguments are applied only to the future, while for the past there are auxiliary sources of information which tell us that it was low entropy.{{citation needed|date=August 2012}} The first part of the second law, which states that the entropy of a thermally isolated system can only increase, is a trivial consequence of the equal prior probability postulate, if we restrict the notion of the entropy to systems in thermal equilibrium. The entropy of an isolated system in thermal equilibrium containing an amount of energy of E is:
S = k_{mathrm B} lnleft[Omegaleft(Eright)right],
where Omegaleft(Eright) is the number of quantum states in a small interval between E and E +delta E. Here delta E is a macroscopically small energy interval that is kept fixed. Strictly speaking this means that the entropy depends on the choice of delta E. However, in the thermodynamic limit (i.e. in the limit of infinitely large system size), the specific entropy (entropy per unit volume or per unit mass) does not depend on delta E.Suppose we have an isolated system whose macroscopic state is specified by a number of variables. These macroscopic variables can, e.g., refer to the total volume, the positions of pistons in the system, etc. Then Omega will depend on the values of these variables. If a variable is not fixed, (e.g. we do not clamp a piston in a certain position), then because all the accessible states are equally likely in equilibrium, the free variable in equilibrium will be such that Omega is maximized as that is the most probable situation in equilibrium.If the variable was initially fixed to some value then upon release and when the new equilibrium has been reached, the fact the variable will adjust itself so that Omega is maximized, implies that the entropy will have increased or it will have stayed the same (if the value at which the variable was fixed happened to be the equilibrium value).Suppose we start from an equilibrium situation and we suddenly remove a constraint on a variable. Then right after we do this, there are a number Omega of accessible microstates, but equilibrium has not yet been reached, so the actual probabilities of the system being in some accessible state are not yet equal to the prior probability of 1/Omega. We have already seen that in the final equilibrium state, the entropy will have increased or have stayed the same relative to the previous equilibrium state. Boltzmann's H-theorem, however, proves that the quantity {{math|H}} increases monotonically as a function of time during the intermediate out of equilibrium state.

### Derivation of the entropy change for reversible processes

The second part of the Second Law states that the entropy change of a system undergoing a reversible process is given by:
dS =frac{delta Q}{T}
where the temperature is defined as:
frac{1}{k_{mathrm B} T}equivbetaequivfrac{dlnleft[Omegaleft(Eright)right]}{dE}
See here for the justification for this definition. Suppose that the system has some external parameter, x, that can be changed. In general, the energy eigenstates of the system will depend on x. According to the adiabatic theorem of quantum mechanics, in the limit of an infinitely slow change of the system's Hamiltonian, the system will stay in the same energy eigenstate and thus change its energy according to the change in energy of the energy eigenstate it is in.The generalized force, X, corresponding to the external variable x is defined such that X dx is the work performed by the system if x is increased by an amount dx. E.g., if x is the volume, then X is the pressure. The generalized force for a system known to be in energy eigenstate E_{r} is given by:
X = -frac{dE_{r}}{dx}
Since the system can be in any energy eigenstate within an interval of delta E, we define the generalized force for the system as the expectation value of the above expression:
X = -leftlanglefrac{dE_{r}}{dx}rightrangle,
To evaluate the average, we partition the Omegaleft(Eright) energy eigenstates by counting how many of them have a value for frac{dE_{r}}{dx} within a range between Y and Y + delta Y. Calling this number Omega_{Y}left(Eright), we have:
Omegaleft(Eright)=sum_{Y}Omega_{Y}left(Eright),
The average defining the generalized force can now be written:
X = -frac{1}{Omegaleft(Eright)}sum_{Y} YOmega_{Y}left(Eright),
We can relate this to the derivative of the entropy with respect to x at constant energy E as follows. Suppose we change x to x + dx. Then Omegaleft(Eright) will change because the energy eigenstates depend on x, causing energy eigenstates to move into or out of the range between E and E+delta E. Let's focus again on the energy eigenstates for which frac{dE_{r}}{dx} lies within the range between Y and Y + delta Y. Since these energy eigenstates increase in energy by Y dx, all such energy eigenstates that are in the interval ranging from E â€“ Y dx to E move from below E to above E. There are
N_{Y}left(Eright)=frac{Omega_{Y}left(Eright)}{delta E} Y dx,
such energy eigenstates. If Y dxleqdelta E, all these energy eigenstates will move into the range between E and E+delta E and contribute to an increase in Omega. The number of energy eigenstates that move from below E+delta E to above E+delta E is given by N_{Y}left(E+delta Eright). The difference
N_{Y}left(Eright) - N_{Y}left(E+delta Eright),
is thus the net contribution to the increase in Omega. Note that if Y dx is larger than delta E there will be the energy eigenstates that move from below E to above E+delta E. They are counted in both N_{Y}left(Eright) and N_{Y}left(E+delta Eright), therefore the above expression is also valid in that case.Expressing the above expression as a derivative with respect to E and summing over Y yields the expression:
left(frac{partialOmega}{partial x}right)_{E} = -sum_{Y}Yleft(frac{partialOmega_{Y}}{partial E}right)_{x}= left(frac{partialleft(Omega Xright)}{partial E}right)_{x},
The logarithmic derivative of Omega with respect to x is thus given by:
left(frac{partiallnleft(Omegaright)}{partial x}right)_{E} = beta X +left(frac{partial X}{partial E}right)_{x},
The first term is intensive, i.e. it does not scale with system size. In contrast, the last term scales as the inverse system size and will thus vanishes in the thermodynamic limit. We have thus found that:
left(frac{partial S}{partial x}right)_{E} = frac{X}{T},
Combining this with
left(frac{partial S}{partial E}right)_{x} = frac{1}{T},
Gives:
dS = left(frac{partial S}{partial E}right)_{x}dE+left(frac{partial S}{partial x}right)_{E}dx = frac{dE}{T} + frac{X}{T} dx=frac{delta Q}{T},

### Derivation for systems described by the canonical ensemble

If a system is in thermal contact with a heat bath at some temperature T then, in equilibrium, the probability distribution over the energy eigenvalues are given by the canonical ensemble:
P_{j}=frac{expleft(-frac{E_{j}}{k_{mathrm B} T}right)}{Z}
Here Z is a factor that normalizes the sum of all the probabilities to 1, this function is known as the partition function. We now consider an infinitesimal reversible change in the temperature and in the external parameters on which the energy levels depend. It follows from the general formula for the entropy:
S = -k_{mathrm B}sum_{j}P_{j}lnleft(P_{j}right)
that
dS = -k_{mathrm B}sum_{j}lnleft(P_{j}right)dP_{j}
Inserting the formula for P_{j} for the canonical ensemble in here gives:
dS = frac{1}{T}sum_{j}E_{j}dP_{j}=frac{1}{T}sum_{j}dleft(E_{j}P_{j}right) - frac{1}{T}sum_{j}P_{j}dE_{j}= frac{dE + delta W}{T}=frac{delta Q}{T}

## Living organisms

There are two principal ways of formulating thermodynamics, (a) through passages from one state of thermodynamic equilibrium to another, and (b) through cyclic processes, by which the system is left unchanged, while the total entropy of the surroundings is increased. These two ways help to understand the processes of life. This topic is mostly beyond the scope of this present article, but has been considered by several authors, such as Erwin SchrÃ¶dinger, LÃ©on BrillouinLÃ©on Brillouin Science and Information Theory (Academic Press, 1962) (Dover, 2004) and Isaac Asimov. It is also the topic of current{{When|date=July 2019}} research.{{Citation needed|date=July 2019}}To a fair approximation, living organisms may be considered as examples of (b). Approximately, an animal's physical state cycles by the day, leaving the animal nearly unchanged. Animals take in food, water, and oxygen, and, as a result of metabolism, give out breakdown products and heat. Plants take in radiative energy from the sun, which may be regarded as heat, and carbon dioxide and water. They give out oxygen. In this way they grow. Eventually they die, and their remains rot away, turning mostly back into carbon dioxide and water. This can be regarded as a cyclic process. Overall, the sunlight is from a high temperature source, the sun, and its energy is passed to a lower temperature sink, i.e. radiated into space. This is an increase of entropy of the surroundings of the plant. Thus animals and plants obey the second law of thermodynamics, considered in terms of cyclic processes. Simple concepts of efficiency of heat engines are hardly applicable to this problem because they assume closed systems.From the thermodynamic viewpoint that considers (a), passages from one equilibrium state to another, only a roughly approximate picture appears, because living organisms are never in states of thermodynamic equilibrium. Living organisms must often be considered as open systems, because they take in nutrients and give out waste products. Thermodynamics of open systems is currently often considered in terms of passages from one state of thermodynamic equilibrium to another, or in terms of flows in the approximation of local thermodynamic equilibrium. The problem for living organisms may be further simplified by the approximation of assuming a steady state with unchanging flows. General principles of entropy production for such approximations are subject to unsettled current debate or research. Nevertheless, ideas derived from this viewpoint on the second law of thermodynamics are enlightening about living creatures.

## Gravitational systems

In systems that do not require for their descriptions the general theory of relativity, bodies always have positive heat capacity, meaning that the temperature rises with energy. Therefore, when energy flows from a high-temperature object to a low-temperature object, the source temperature is decreased while the sink temperature is increased; hence temperature differences tend to diminish over time. This is not always the case for systems in which the gravitational force is important and the general theory of relativity is required. Such systems can spontaneously change towards uneven spread of mass and energy. This applies to the universe in large scale, and consequently it may be difficult or impossible to apply the second law to it.Grandy, W.T. (Jr) (2008), p. 151. Beyond this, the thermodynamics of systems described by the general theory of relativity is beyond the scope of the present article.

## Non-equilibrium states

The theory of classical or equilibrium thermodynamics is idealized. A main postulate or assumption, often not even explicitly stated, is the existence of systems in their own internal states of thermodynamic equilibrium. In general, a region of space containing a physical system at a given time, that may be found in nature, is not in thermodynamic equilibrium, read in the most stringent terms. In looser terms, nothing in the entire universe is or has ever been truly in exact thermodynamic equilibrium.Callen, H.B. (1960/1985), p. 15.For purposes of physical analysis, it is often enough convenient to make an assumption of thermodynamic equilibrium. Such an assumption may rely on trial and error for its justification. If the assumption is justified, it can often be very valuable and useful because it makes available the theory of thermodynamics. Elements of the equilibrium assumption are that a system is observed to be unchanging over an indefinitely long time, and that there are so many particles in a system, that its particulate nature can be entirely ignored. Under such an equilibrium assumption, in general, there are no macroscopically detectable fluctuations. There is an exception, the case of critical states, which exhibit to the naked eye the phenomenon of critical opalescence. For laboratory studies of critical states, exceptionally long observation times are needed.In all cases, the assumption of thermodynamic equilibrium, once made, implies as a consequence that no putative candidate "fluctuation" alters the entropy of the system.It can easily happen that a physical system exhibits internal macroscopic changes that are fast enough to invalidate the assumption of the constancy of the entropy. Or that a physical system has so few particles that the particulate nature is manifest in observable fluctuations. Then the assumption of thermodynamic equilibrium is to be abandoned. There is no unqualified general definition of entropy for non-equilibrium states.Lieb, E.H., Yngvason, J. (2003), p. 190.There are intermediate cases, in which the assumption of local thermodynamic equilibrium is a very good approximation,Gyarmati, I. (1967/1970), pp. 4-14.Glansdorff, P., Prigogine, I. (1971).MÃ¼ller, I. (1985).MÃ¼ller, I. (2003). but strictly speaking it is still an approximation, not theoretically ideal. For non-equilibrium situations in general, it may be useful to consider statistical mechanical definitions of other quantities that may be conveniently called 'entropy', but they should not be confused or conflated with thermodynamic entropy properly defined for the second law. These other quantities indeed belong to statistical mechanics, not to thermodynamics, the primary realm of the second law.Even though the applicability of the second law of thermodynamics is limited for non-equilibrium systems, the laws governing such systems are still being discussed. One of the guiding principles for systems which are far from equilibrium is the maximum entropy production principle.JOURNAL, Onsager, L., Reciprocal Relations in Irreversible Processes, Phys. Rev., 37, 4, 405â€“426, 1931, 10.1103/PhysRev.37.405, 1931PhRv...37..405O, BOOK, Ziegler, H., An Introduction to Thermomechanics, 1983, North Holland, Amsterdam, It states that a system away from equilibrium evolves in such a way as to maximize entropy production, given present constraints.JOURNAL, Belkin, A., et., al., Self-Assembled Wiggling Nano-Structures and the Principle of Maximum Entropy Production, Sci. Rep., 5, 8323, 2015, 10.1038/srep08323, 25662746, 4321171, 2015NatSR...5E8323B, The physics of macroscopically observable fluctuations is beyond the scope of this article.

## Arrow of time

{{Further information|Entropy (arrow of time)}}Thermodynamic Asymmetry in Time{{See also|Arrow of time}}The second law of thermodynamics is a physical law that is not symmetric to reversal of the time direction. This does not conflict with notions that have been observed of the fundamental laws of physics, namely CPT symmetry, since the second law applies statistically, it is hypothesized, on time-asymmetric boundary conditions.WEB, Craig, Callender,weblink Thermodynamic Asymmetry in Time, Stanford Encyclopedia of Philosophy, 29 July 2011, The second law has been proposed to supply a partial explanation of the difference between moving forward and backwards in time, such as why the cause precedes the effect (the causal arrow of time).BOOK, J.J., Halliwell, Physical Origins of Time Asymmetry, Cambridge, 1994, 978-0-521-56837-1, etal, chapter 6

## Irreversibility

Irreversibility in thermodynamic processes is a consequence of the asymmetric character of thermodynamic operations, and not of any internally irreversible microscopic properties of the bodies. Thermodynamic operations are macroscopic external interventions imposed on the participating bodies, not derived from their internal properties. There are reputed "paradoxes" that arise from failure to recognize this.

Loschmidt's paradox, also known as the reversibility paradox, is the objection that it should not be possible to deduce an irreversible process from the time-symmetric dynamics that describe the microscopic evolution of a macroscopic system.In the opinion of SchrÃ¶dinger, "It is now quite obvious in what manner you have to reformulate the law of entropy{{snd}}or for that matter, all other irreversible statements{{snd}}so that they be capable of being derived from reversible models. You must not speak of one isolated system but at least of two, which you may for the moment consider isolated from the rest of the world, but not always from each other."SchrÃ¶dinger, E. (1950), p. 192. The two systems are isolated from each other by the wall, until it is removed by the thermodynamic operation, as envisaged by the law. The thermodynamic operation is externally imposed, not subject to the reversible microscopic dynamical laws that govern the constituents of the systems. It is the cause of the irreversibility. The statement of the law in this present article complies with SchrÃ¶dinger's advice. The causeâ€“effect relation is logically prior to the second law, not derived from it.

### Maxwell's demon

{{unreferenced|section|date=August 2018}}James Clerk Maxwell imagined one container divided into two parts, A and B. Both parts are filled with the same gas at equal temperatures and placed next to each other, separated by a wall. Observing the molecules on both sides, an imaginary demon guards a microscopic trapdoor in the wall. When a faster-than-average molecule from A flies towards the trapdoor, the demon opens it, and the molecule will fly from A to B. The average speed of the molecules in B will have increased while in A they will have slowed down on average. Since average molecular speed corresponds to temperature, the temperature decreases in A and increases in B, contrary to the second law of thermodynamics.One response to this question was suggested in 1929 by LeÃ³ SzilÃ¡rd and later by LÃ©on Brillouin. SzilÃ¡rd pointed out that a real-life Maxwell's demon would need to have some means of measuring molecular speed, and that the act of acquiring information would require an expenditure of energy.Maxwell's 'demon' repeatedly alters the permeability of the wall between A and B. It is therefore performing thermodynamic operations on a microscopic scale, not just observing ordinary spontaneous or natural macroscopic thermodynamic processes.

## Quotations

, p. 17.}}

{{colbegin|colwidth=20em}} {{colend}}

## References

{{reflist|20em}}

### Sources

• Adkins, C.J. (1968/1983). Equilibrium Thermodynamics, (1st edition 1968), third edition 1983, Cambridge University Press, Cambridge UK, {{ISBN|0-521-25445-0}}.
• Atkins, P.W., de Paula, J. (2006). Atkins' Physical Chemistry, eighth edition, W.H. Freeman, New York, {{ISBN|978-0-7167-8759-4}}.
• Attard, P. (2012). Non-equilibrium Thermodynamics and Statistical Mechanics: Foundations and Applications, Oxford University Press, Oxford UK, {{ISBN|978-0-19-966276-0}}.
• Baierlein, R. (1999). Thermal Physics, Cambridge University Press, Cambridge UK, {{ISBN|0-521-59082-5}}.
• Bailyn, M. (1994). A Survey of Thermodynamics, American Institute of Physics, New York, {{ISBN|0-88318-797-3}}.
• BOOK, Concepts in thermal physics, Blundell, Stephen J., Blundell, Stephen Blundell, Katherine M., Katherine Blundell, Oxford University Press, 2010, 9780199562107, 2nd, Oxford, 607907330, 10.1093/acprof:oso/9780199562091.001.0001,weblink
• Boltzmann, L. (1896/1964). Lectures on Gas Theory, translated by S.G. Brush, University of California Press, Berkeley.
• Borgnakke, C., Sonntag., R.E. (2009). Fundamentals of Thermodynamics, seventh edition, Wiley, {{ISBN|978-0-470-04192-5}}.
• Buchdahl, H.A. (1966). The Concepts of Classical Thermodynamics, Cambridge University Press, Cambridge UK.
• Bridgman, P.W. (1943). The Nature of Thermodynamics, Harvard University Press, Cambridge MA.
• Callen, H.B. (1960/1985). Thermodynamics and an Introduction to Thermostatistics, (1st edition 1960) 2nd edition 1985, Wiley, New York, {{ISBN|0-471-86256-8}}.
year=1909volume=67, 3url=http://gdz.sub.uni-goettingen.de/index.php?id=11&PPN=PPN235181684_0067&DMDID=DMDLOG_0033&L=1doi=10.1007/bf01450409, . A translation may be found here. Also a mostly reliable translation is to be found at Kestin, J. (1976). The Second Law of Thermodynamics, Dowden, Hutchinson & Ross, Stroudsburg PA.
• Carnot, S. (1824/1986). Reflections on the motive power of fire, Manchester University Press, Manchester UK, {{ISBN|0-7190-1741-6}}. Also here.
• Chapman, S., Cowling, T.G. (1939/1970). The Mathematical Theory of Non-uniform gases. An Account of the Kinetic Theory of Viscosity, Thermal Conduction and Diffusion in Gases, third edition 1970, Cambridge University Press, London.
• JOURNAL, harv, Clausius, R., Rudolf Clausius, Ueber Die Bewegende Kraft Der WÃ¤rme Und Die Gesetze, Welche Sich Daraus FÃ¼r Die WÃ¤rmelehre Selbst Ableiten Lassen, Annalen der Physik, 1850, 79, 4, 368â€“397, 500â€“524,weblink 26 June 2012, 10.1002/andp.18501550403, 1850AnP...155..500C, Translated into English: JOURNAL, Clausius, R., On the Moving Force of Heat, and the Laws regarding the Nature of Heat itself which are deducible therefrom, London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, July 1851, 2, 4th, VIII, 1â€“21; 102â€“119,weblink 26 June 2012, 10.1080/14786445108646819,
• JOURNAL, harv, Clausius, R., Rudolf Clausius, Ãœber eine verÃ¤nderte Form des zweiten Hauptsatzes der mechanischen WÃ¤rmetheorie, 1854, Annalen der Physik, xciii, 12, 481â€“506,weblink 24 March 2014, 10.1002/andp.18541691202
TITLE=ON A MODIFIED FORM OF THE SECOND FUNDAMENTAL THEOREM IN THE MECHANICAL THEORY OF HEATDATE=JULY 1856SERIES=4THURL=HTTPS://WWW.BIODIVERSITYLIBRARY.ORG/ITEM/20044#PAGE/100/MODE/1UP, 24 March 2014, Reprinted in: BOOK, Clausius, R., Rudolf Clausius, The Mechanical Theory of Heat â€“ with its Applications to the Steam Engine and to Physical Properties of Bodies, 1867, John van Voorst, London,weblink 19 June 2012,
• Denbigh, K. (1954/1981). The Principles of Chemical Equilibrium. With Applications in Chemistry and Chemical Engineering, fourth edition, Cambridge University Press, Cambridge UK, {{ISBN|0-521-23682-7}}.
• Eu, B.C. (2002). Generalized Thermodynamics. The Thermodynamics of Irreversible Processes and Generalized Hydrodynamics, Kluwer Academic Publishers, Dordrecht, {{ISBN|1-4020-0788-4}}.
• Gibbs, J.W. (1876/1878). On the equilibrium of heterogeneous substances, Trans. Conn. Acad., 3: 108-248, 343-524, reprinted in The Collected Works of J. Willard Gibbs, Ph.D, LL. D., edited by W.R. Longley, R.G. Van Name, Longmans, Green & Co., New York, 1928, volume 1, pp. 55â€“353.
• Griem, H.R. (2005). Principles of Plasma Spectroscopy (Cambridge Monographs on Plasma Physics), Cambridge University Press, New York {{ISBN|0-521-61941-6}}.
• Glansdorff, P., Prigogine, I. (1971). Thermodynamic Theory of Structure, Stability, and Fluctuations, Wiley-Interscience, London, 1971, {{ISBN|0-471-30280-5}}.
• Grandy, W.T., Jr (2008). Entropy and the Time Evolution of Macroscopic Systems. Oxford University Press. {{ISBN|978-0-19-954617-6}}.
• Greven, A., Keller, G., Warnecke (editors) (2003). Entropy, Princeton University Press, Princeton NJ, {{ISBN|0-691-11338-6}}.
• Guggenheim, E.A. (1949). 'Statistical basis of thermodynamics', Research, 2: 450â€“454.
• Guggenheim, E.A. (1967). Thermodynamics. An Advanced Treatment for Chemists and Physicists, fifth revised edition, North Holland, Amsterdam.
• Gyarmati, I. (1967/1970) Non-equilibrium Thermodynamics. Field Theory and Variational Principles, translated by E. Gyarmati and W.F. Heinz, Springer, New York.
• Kittel, C., Kroemer, H. (1969/1980). Thermal Physics, second edition, Freeman, San Francisco CA, {{ISBN|0-7167-1088-9}}.
• Kondepudi, D., Prigogine, I. (1998). Modern Thermodynamics: From Heat Engines to Dissipative Structures, John Wiley & Sons, Chichester, {{ISBN|0-471-97393-9}}.
• Lebon, G., Jou, D., Casas-VÃ¡zquez, J. (2008). Understanding Non-equilibrium Thermodynamics: Foundations, Applications, Frontiers, Springer-Verlag, Berlin, {{ISBN|978-3-540-74252-4}}.
• JOURNAL, harv, The Physics and Mathematics of the Second Law of Thermodynamics, Lieb, E. H., Yngvason, J., Physics Reports, 310, 1, 1â€“96, 1999, 10.1016/S0370-1573(98)00082-9, cond-mat/9708200, 1999PhR...310....1L,
• Lieb, E.H., Yngvason, J. (2003). The Entropy of Classical Thermodynamics, pp. 147â€“195, Chapter 8 of Entropy, Greven, A., Keller, G., Warnecke (editors) (2003).
• BOOK, harv, F., Mandl, Statistical physics, second, 1988, Wiley & Sons, 978-0-471-91533-1,
• JOURNAL, Maxwell, J.C., James Clerk Maxwell, 1867, On the dynamical theory of gases, Phil. Trans. R. Soc. Lond., 157, 49â€“88, 10.1098/rstl.1867.0004,
• MÃ¼ller, I. (1985). Thermodynamics, Pitman, London, {{ISBN|0-273-08577-8}}.
• MÃ¼ller, I. (2003). Entropy in Nonequilibrium, pp. 79â€“109, Chapter 5 of Entropy, Greven, A., Keller, G., Warnecke (editors) (2003).
• MÃ¼nster, A. (1970), Classical Thermodynamics, translated by E.S. Halberstadt, Wileyâ€“Interscience, London, {{ISBN|0-471-62430-6}}.
• Pippard, A.B. (1957/1966). Elements of Classical Thermodynamics for Advanced Students of Physics, original publication 1957, reprint 1966, Cambridge University Press, Cambridge UK.
• Planck, M. (1897/1903). Treatise on Thermodynamics, translated by A. Ogg, Longmans Green, London, p. 100.
• Planck. M. (1914). The Theory of Heat Radiation, a translation by Masius, M. of the second German edition, P. Blakiston's Son & Co., Philadelphia.
• Planck, M. (1926). Ãœber die BegrÃ¼ndung des zweiten Hauptsatzes der Thermodynamik, Sitzungsberichte der Preussischen Akademie der Wissenschaften: Physikalisch-mathematische Klasse: 453â€“463.
• Pokrovskii V.N. (2005) Extended thermodynamics in a discrete-system approach, Eur. J. Phys. vol. 26, 769-781.
• JOURNAL, 10.1155/2013/906136, A Derivation of the Main Relations of Nonequilibrium Thermodynamics, ISRN Thermodynamics, 2013, 1â€“9, 2013, Pokrovskii, Vladimir N.,
• Quinn, T.J. (1983). Temperature, Academic Press, London, {{ISBN|0-12-569680-9}}.
• BOOK, harv, Y.V.C., Rao, An Introduction to thermodynamics,weblink 2004, Universities Press, 978-81-7371-461-0, 213,
• Roberts, J.K., Miller, A.R. (1928/1960). Heat and Thermodynamics, (first edition 1928), fifth edition, Blackie & Son Limited, Glasgow.
• SchrÃ¶dinger, E. (1950). Irreversibility, Proc. R. Ir. Acad., A53: 189â€“195.
• ter Haar, D., Wergeland, H. (1966). Elements of Thermodynamics, Addison-Wesley Publishing, Reading MA.
• JOURNAL, harv, Thomson, W., William Thomson, 1st Baron Kelvin, On the Dynamical Theory of Heat, with numerical results deduced from Mr Joule's equivalent of a Thermal Unit, and M. Regnault's Observations on Steam, Transactions of the Royal Society of Edinburgh, 1851, XX, part II, 261â€“268; 289â€“298,weblink Also published in JOURNAL, Thomson, W., On the Dynamical Theory of Heat, with numerical results deduced from Mr Joule's equivalent of a Thermal Unit, and M. Regnault's Observations on Steam, Philos. Mag., December 1852, IV, 4, 22, 13,weblink 25 June 2012,
• Thomson, W. (1852). On the universal tendency in nature to the dissipation of mechanical energy Philosophical Magazine, Ser. 4, p. 304.
• Tisza, L. (1966). Generalized Thermodynamics, M.I.T Press, Cambridge MA.
• Truesdell, C. (1980). The Tragicomical History of Thermodynamics 1822â€“1854, Springer, New York, {{ISBN|0-387-90403-4}}.
• Uffink, J. (2001). Bluff your way in the second law of thermodynamics, Stud. Hist. Phil. Mod. Phys., 32(3): 305â€“394.
• Uffink, J. (2003). Irreversibility and the Second Law of Thermodynamics, Chapter 7 of Entropy, Greven, A., Keller, G., Warnecke (editors) (2003), Princeton University Press, Princeton NJ, {{ISBN|0-691-11338-6}}.
• Uhlenbeck, G.E., Ford, G.W. (1963). Lectures in Statistical Mechanics, American Mathematical Society, Providence RI.
• Zemansky, M.W. (1968). Heat and Thermodynamics. An Intermediate Textbook, fifth edition, McGraw-Hill Book Company, New York.

• Goldstein, Martin, and Inge F., 1993. The Refrigerator and the Universe. Harvard Univ. Press. Chpts. 4â€“9 contain an introduction to the Second Law, one a bit less technical than this entry. {{ISBN|978-0-674-75324-2}}
• Leff, Harvey S., and Rex, Andrew F. (eds.) 2003. Maxwell's Demon 2 : Entropy, classical and quantum information, computing. Bristol UK; Philadelphia PA: Institute of Physics. {{ISBN|978-0-585-49237-7}}
• BOOK, J.J., Halliwell, Physical Origins of Time Asymmetry, Cambridge, 1994, 978-0-521-56837-1, (technical).
• BOOK, Reflections on the Motive Power of Heat and on Machines Fitted to Develop That Power, Carnot, Sadi, Robert Henry Thurston, Thurston, Robert Henry, 1890, J. Wiley & Sons, New York, (full text of 1897 ed.) (html)
• Stephen Jay Kline (1999). The Low-Down on Entropy and Interpretive Thermodynamics, La CaÃ±ada, CA: DCW Industries. {{ISBN|1-928729-01-0}}.
• BOOK, Kostic, M, 2011, Revisiting The Second Law of Energy Degradation and Entropy Generation: From Sadi Carnot's Ingenious Reasoning to Holistic Generalization, AIP Conf. Proc., 1411, 1, 327â€“350, 10.1063/1.3665247, 978-0-7354-0985-9, 2011AIPC.1411..327K, AIP Conference Proceedings, 10.1.1.405.1945, also at weblink" title="https:/-/web.archive.org/web/20130420222450weblink">weblink.

- content above as imported from Wikipedia
- "second law of thermodynamics" does not exist on GetWiki (yet)
- time: 10:31am EDT - Tue, Aug 20 2019
[ this remote article is provided by Wikipedia ]
LATEST EDITS [ see all ]
GETWIKI 09 JUL 2019
Eastern Philosophy
History of Philosophy
GETWIKI 09 MAY 2016
GETWIKI 18 OCT 2015
M.R.M. Parrott
Biographies
GETWIKI 20 AUG 2014
GETWIKI 19 AUG 2014
CONNECT