GetWiki

{{short description|Long and narrow depressions of the sea floor}}File:Subduction-en.svg|thumb|right|400px|Oceanic crust is formed at an oceanic ridgeoceanic ridgeOceanic trenches are prominent, long, narrow topographic depressions of the ocean floor. They are typically {{convert|50|to|100|km|sigfig=1|sp=us}} wide and {{cvt|3|to|4|km|mi|abbr=on}} below the level of the surrounding oceanic floor, but can be thousands of kilometers in length. There are about {{cvt|50000|km|mi}} of oceanic trenches worldwide, mostly around the Pacific Ocean, but also in the eastern Indian Ocean and a few other locations. The greatest ocean depth measured is in the Challenger Deep of the Mariana Trench, at a depth of {{cvt|10,994|m|ft}} below sea level.Oceanic trenches are a feature of the Earth’s distinctive plate tectonics. They mark the locations of convergent plate boundaries, along which lithospheric plates move towards each other at rates that vary from a few millimeters to over ten centimeters per year. Oceanic lithosphere moves into trenches at a global rate of about {{cvt|3|km2|sqmi}} per year.{{sfn|Rowley|2002}} A trench marks the position at which the flexed, subducting slab begins to descend beneath another lithospheric slab. Trenches are generally parallel to and about {{cvt|200|km|mi}} from a volcanic arc.Much of the fluid trapped in sediments of the subducting slab returns to the surface at the oceanic trench, producing mud volcanoes and cold seeps. These support unique biomes based on chemotrophic microorganisms. There is concern that plastic debris is accumulating in trenches and threatening these communities.

Geographic distribution

File:Pacific elevation2.jpg|thumb|upright=1.4|Major Pacific trenches (1–10) and fracture zones (11–20): 1. Kermadec2. Tonga3. Bougainville4. Mariana5. Izu–Ogasawara6. Japan7. Kuril–Kamchatka8. Aleutian9. Middle America10. Peru–Chile11. Mendocino12. Murray13. Molokai14. Clarion15. Clipperton16. Challenger17. Eltanin18. Udintsev19. East Pacific Rise (S-shaped)20. Nazca Ridge]]There are approximately {{convert|50000|km|mi|abbr=on}} of convergent plate margins worldwide. These are mostly located around the Pacific Ocean, but are also found in the eastern Indian Ocean, with a few shorter convergent margin segments in other parts of the Indian Ocean, in the Atlantic Ocean, and in the Mediterranean.{{sfn|Stern|2005}} They are found on the oceanward side of island arcs and Andean-type orogens.{{sfn|Kearey|Klepeis|Vine|2009|p=250}} Globally, there are over 50 major ocean trenches covering an area of 1.9 million km2 or about 0.5% of the oceans.{{sfn|Harris|MacMillan-Lawler|Rupp|Baker |2014}}Trenches are geomorphologically distinct from troughs. Troughs are elongated depressions of the sea floor with steep sides and flat bottoms, while trenches are characterized by a V-shaped profile.{{sfn|Harris|MacMillan-Lawler|Rupp|Baker |2014}} Trenches that are partially infilled are sometimes described as troughs, for example the Makran Trough.{{sfn|Dastanpour|1996}} Some trenches are completely buried and lack bathymetric expression as in the Cascadia subduction zone,{{sfn|Thomas|Burbidge|Cummins|2007}} which is completely filled with sediments.{{sfn|Goldfinger|Nelson|Morey|Johnson|2012}} Despite their appearance, in these instances the fundamental plate-tectonic structure is still an oceanic trench. Some troughs look similar to oceanic trenches but possess other tectonic structures. One example is the Lesser Antilles Trough, which is the forearc basin of the Lesser Antilles subduction zone.{{sfn|Westbrook|Mascle|Biju-Duval|1984}} Also not a trench is the New Caledonia trough, which is an extensional sedimentary basin related to the Tonga-Kermadec subduction zone.{{sfn|Hackney|Sutherland|Collot|2012}} Additionally, the Cayman Trough, which is a pull-apart basin within a transform fault zone,{{sfn|Einsele|2000}} is not an oceanic trench.Trenches, along with volcanic arcs and Wadati-Benioff zones (zones of earthquakes under a volcanic arc) are diagnostic of convergent plate boundaries and their deeper manifestations, subduction zones.{{sfn|Stern|2005}}{{sfn|Kearey|Klepeis|Vine|2009|p=250}}{{sfn|Geersen|Voelker|Behrmann|2018}} Here, two tectonic plates are drifting into each other at a rate of a few millimeters to over {{convert|10|cm|sigfig=1|sp=us}} per year. At least one of the plates is oceanic lithosphere, which plunges under the other plate to be recycled in the Earth’s mantle. Trenches are related to, but distinct from, continental collision zones, such as the Himalayas. Unlike in trenches, in continental collision zones continental crust enters a subduction zone. When buoyant continental crust enters a trench, subduction comes to a halt and the area becomes a zone of continental collision. Features analogous to trenches are associated with collision zones. One such feature is the peripheral foreland basin, a sediment-filled foredeep. Examples of peripheral foreland basins include the floodplains of the Ganges River and the Tigris-Euphrates river system.{{sfn|Stern|2005}}

History of the term “trench”

Trenches were not clearly defined until the late 1940s and 1950s. The bathymetry of the ocean was poorly known prior to the Challenger expedition of 1872–1876,{{sfn|Eiseley|1946}} which took 492 soundings of the deep ocean.{{sfn|Weyl|1969|p=49}} At station #225, the expedition discovered Challenger Deep,{{sfn|Thomson|Murray|1895}} now known to be the southern end of the Mariana Trench. The laying of transatlantic telegraph cables on the seafloor between the continents during the late 19th and early 20th centuries provided further motivation for improved bathymetry.{{sfn|McConnell|1990}} The term trench, in its modern sense of a prominent elongated depression of the sea bottom, was first used by Johnstone in his 1923 textbook An Introduction to Oceanography.{{sfn|Johnstone |1923}}{{sfn|Stern|2005}}During the 1920s and 1930s, Felix Andries Vening Meinesz measured gravity over trenches using a newly developed gravimeter that could measure gravity from aboard a submarine.{{sfn|Geersen|Voelker|Behrmann|2018}} He proposed the tectogene hypothesis to explain the belts of negative gravity anomalies that were found near island arcs. According to this hypothesis, the belts were zones of downwelling of light crustal rock arising from subcrustal convection currents. The tectogene hypothesis was further developed by Griggs in 1939, using an analogue model based on a pair of rotating drums. Harry Hammond Hess substantially revised the theory based on his geological analysis.{{sfn|Allwrardt|1993}}World War II in the Pacific led to great improvements of bathymetry, particularly in the western Pacific. In light of these new measurements, the linear nature of the deeps became clear. There was a rapid growth of deep sea research efforts, especially the widespread use of echosounders in the 1950s and 1960s. These efforts confirmed the morphological utility of the term “trench.” Important trenches were identified, sampled, and mapped via sonar. The early phase of trench exploration reached its peak with the 1960 descent of the Bathyscaphe Trieste to the bottom of the Challenger Deep. Following Robert S. Dietz’ and Harry Hess’ promulgation of the seafloor spreading hypothesis in the early 1960s and the plate tectonic revolution in the late 1960s, the oceanic trench became an important concept in plate tectonic theory.{{sfn|Geersen|Voelker|Behrmann|2018}}

Morphology

File:Subduction Trench Schematic.jpg|thumb|upright=2.0|Cross section of an oceanic trench formed along an oceanic-oceanic convergent boundaryconvergent boundaryFile:Peru-Chile trench.jpg|thumb|160px| The Peru–Chile Trench is located just left of the sharp line between the blue deep ocean (on the left) and the light blue continental shelf, along the west coast of South America. It runs along an oceanic-continental boundary, where the oceanic Nazca Plate subducts beneath the continental South American PlateSouth American PlateOceanic trenches are {{convert|50 to 100|km|sigfig=1|sp=us}} wide and have an asymmetric V-shape, with the steeper slope (8 to 20 degrees) on the inner (overriding) side of the trench and the gentler slope (around 5 degrees) on the outer (subducting) side of the trench.{{sfn|Kearey|Klepeis|Vine|2009|pp=250–251}}{{sfn|Geersen|Voelker|Behrmann|2018|p=420}} The bottom of the trench marks the boundary between the subducting and overriding plates, known as the basal plate boundary shear{{sfn|Geersen|Voelker|Behrmann|2018|pp=411–412}} or the subduction décollement.{{sfn|Stern|2005}} The depth of the trench depends on the starting depth of the oceanic lithosphere as it begins its plunge into the trench, the angle at which the slab plunges, and the amount of sedimentation in the trench. Both starting depth and subduction angle are greater for older oceanic lithosphere, which is reflected in the deep trenches of the western Pacific. Here the bottoms of the Marianas and the Tonga–Kermadec trenches are up to {{convert|10–11|km||sp=us}} below sea level. In the eastern Pacific, where the subducting oceanic lithosphere is much younger, the depth of the Peru-Chile trench is around {{convert|7 to 8|km||sp=us}}.{{sfn|Kearey|Klepeis|Vine|2009|pp=250–251}}Though narrow, oceanic trenches are remarkably long and continuous, forming the largest linear depressions on earth. An individual trench can be thousands of kilometers long.{{sfn|Kearey|Klepeis|Vine|2009|p=250}} Most trenches are convex towards the subducting slab, which is attributed to the spherical geometry of the Earth.{{sfn|Kearey|Klepeis|Vine|2009|p=251}}The trench asymmetry reflects the different physical mechanisms that determine the inner and outer slope angle. The outer slope angle of the trench is determined by the bending radius of the subducting slab, as determined by its elastic thickness. Since oceanic lithosphere thickens with age, the outer slope angle is ultimately determined by the age of the subducting slab.{{sfn|Bodine|Watts|1979}}{{sfn|Geersen|Voelker|Behrmann|2018|pp=411–412}} The inner slope angle is determined by the angle of repose of the overriding plate edge.{{sfn|Geersen|Voelker|Behrmann|2018|pp=411–412}} This reflects frequent earthquakes along the trench that prevent oversteepening of the inner slope.{{sfn|Stern|2005}}As the subducting plate approaches the trench, it bends slightly upwards before beginning its plunge into the depths. As a result, the outer trench slope is bounded by an outer trench high. This is subtle, often only tens of meters high, and is typically located a few tens of kilometers from the trench axis. On the outer slope itself, where the plate begins to bend downwards into the trench, the upper part of the subducting slab is broken by bending faults that give the outer trench slope a horst and graben topography. The formation of these bending faults is suppressed where oceanic ridges or large seamounts are subducting into the trench, but the bending faults cut right across smaller seamounts. Where the subducting slab is only thinly veneered with sediments, the outer slope will often show seafloor spreading ridges oblique to the horst and graben ridges.{{sfn|Geersen|Voelker|Behrmann|2018|pp=411–412}}

Sedimentation

Trench morphology is strongly modified by the amount of sedimentation in the trench. This varies from practically no sedimentation, as in the Tonga-Kermadec trench, to completely filled with sediments, as with the Cascadia subduction zone. Sedimentation is largely controlled by whether the trench is near a continental sediment source.{{sfn|Kearey|Klepeis|Vine|2009|p=251}} The range of sedimentation is well illustrated by the Chilean trench. The north Chile portion of the trench, which lies along the Atacama Desert with its very slow rate of weathering, is sediment-starved, with from 20 to a few hundred meters of sediments on the trench floor. The tectonic morphology of this trench segment is fully exposed on the ocean bottom. The central Chile segment of the trench is moderately sedimented, with sediments onlapping onto pelagic sediments or ocean basement of the subducting slab, but the trench morphology is still clearly discernible. The southern Chile segment of the trench is fully sedimented, to the point where the outer rise and slope are no longer discernible. Other fully sedimented trenches include the Makran Trough, where sediments are up to {{convert|7.5|km||sp=us}} thick; the Cascadia subduction zone, which is completed buried by {{convert|3 to 4|km||sp=us}} of sediments; and the northernmost Sumatra subduction zone, which is buried under {{convert|6|km||sp=us}} of sediments.{{sfn|Geersen|Voelker|Behrmann|2018|pp=412–416}}Sediments are sometimes transported along the axis of an oceanic trench. The central Chile trench experiences transport of sediments from source fans along an axial channel.{{sfn|Völker|Geersen|Contreras-Reyes|Reichert|2013}} Similar transport of sediments has been documented in the Aleutian trench.{{sfn|Stern|2005}}In addition to sedimentation from rivers draining into a trench, sedimentation also takes place from landslides on the tectonically steepened inner slope, often driven by megathrust earthquakes. The Reloca Slide of the central Chile trench is an example of this process.{{sfn|Völker|Weinrebe|Behrmann|Bialas|2009}}

Erosive versus accretionary margins

Convergent margins are classified as erosive or accretionary, and this has a strong influence on the morphology of the inner slope of the trench. Erosive margins, such as the northern Peru-Chile, Tonga-Kermadec, and Mariana trenches, correspond to sediment-starved trenches.{{sfn|Kearey|Klepeis|Vine|2009|p=250}} The subducting slab erodes material from the lower part of the overriding slab, reducing its volume. The edge of the slab experiences subsidence and steepening, with normal faulting. The slope is underlain by relative strong igneous and metamorphic rock, which maintains a high angle of repose.{{sfn|Geersen|Voelker|Behrmann|2018|p=416}} Over half of all convergent margins are erosive margins.{{sfn|Stern|2005}}Accretionary margins, such as the southern Peru-Chile, Cascadia, and Aleutians, are associated with moderately to heavily sedimented trenches. As the slab subducts, sediments are “bulldozed” onto the edge of the overriding plate, producing an accretionary wedge or accretionary prism. This builds the overriding plate outwards. Because the sediments lack strength, their angle of repose is gentler than the rock making up the inner slope of erosive margin trenches. The inner slope is underlain by imbricated thrust sheets of sediments. The inner slope topography is roughened by localized mass wasting.{{sfn|Geersen|Voelker|Behrmann|2018|p=416}} Cascadia has practically no bathymetric expression of the outer rise and trench, due to complete sediment filling, but the inner trench slope is complex, with many thrust ridges. These compete with canyon formation by rivers draining into the trench. Inner trench slopes of erosive margins rarely show thrust ridges.{{sfn|Geersen|Voelker|Behrmann|2018|p=420}}Accretionary prisms grow in two ways. The first is by frontal accretion, in which sediments are scraped off the downgoing plate and emplaced at the front of the accretionary prism.{{sfn|Stern|2005}} As the accretionary wedge grows, older sediments further from the trench become increasingly lithified, and faults and other structural features are steepened by rotation towards the trench.{{sfn|Kearey|Klepeis|Vine|2009|pp=264–266}} The other mechanism for accretionary prism growth is underplating{{sfn|Stern|2005}} (also known as basal accretion{{sfn|Bangs|Morgan|Tréhu|Contreras-Reyes|2020}}) of subducted sediments, together with some oceanic crust, along the shallow parts of the subduction decollement. The Franciscan Group of California is interpreted as an ancient accretionary prism in which underplating is recorded as tectonic mélanges and duplex structures.{{sfn|Stern|2005}}File:Oceanic-oceanic convergence Fig21oceanocean.gif|thumb|upright=1.1|Oceanic trench formed along an oceanic-oceanic convergent boundaryconvergent boundaryFile:Cross section of mariana trench.svg|right|upright=1.7|thumb| The Mariana Trench contains the deepest part of the world’s oceans, and runs along an oceanic-oceanic convergent boundary. It is the result of the oceanic Pacific plate subducting beneath the oceanic Mariana plateMariana plate

Earthquakes

Frequent megathrust earthquakes modify the inner slope of the trench by triggering massive landslides. These leave semicircular landslide scarps with slopes of up to 20 degrees on the headwalls and sidewalls.{{sfn|Völker |Geersen |Contreras-Reyes |Sellanes |2014}}Subduction of seamounts and aseismic ridges into the trench may increase aseismic creep and reduce the severity of earthquakes. Contrariwise, subduction of large amounts of sediments may allow ruptures along the subduction décollement to propagate for great distances to produce megathrust earthquakes.{{sfn|Geersen|Voelker|Behrmann|2018|p=421}}

Trench rollback

Trenches seem positionally stable over time, but scientists believe that some trenches—particularly those associated with subduction zones where two oceanic plates converge—move backward into the subducting plate.{{sfn|Dvorkin|Nur|Mavko|Ben-Avraham|1993}}{{sfn|Garfunkel|Anderson|Schubert|1986}} This is called trench rollback or hinge retreat (also hinge rollback) and is one explanation for the existence of back-arc basins. Forces perpendicular to the slab (the portion of the subducting plate within the mantle) are responsible for steepening of the slab and, ultimately, the movement of the hinge and trench at the surface.{{sfn|Schellart|Moresi|2013}} These forces arise from the negative buoyancy of the slab with respect to the mantle{{sfn|Schellart|Lister|Toy|2006}} modified by the geometry of the slab itself.{{sfn|Nakakuki|Mura|2013}} The extension in the overriding plate, in response to the subsequent subhorizontal mantle flow from the displacement of the slab, can result in formation of a back-arc basin.{{sfn|Flower|Dilek|2003}}

Processes involved

Several forces are involved in the process of slab rollback. Two forces acting against each other at the interface of the two subducting plates exert forces against one another. The subducting plate exerts a bending force (FPB) that supplies pressure during subduction, while the overriding plate exerts a force against the subducting plate (FTS). The slab pull force (FSP) is caused by the negative buoyancy of the plate driving the plate to greater depths. The resisting force from the surrounding mantle opposes the slab pull forces. Interactions with the 660-km discontinuity cause a deflection due to the buoyancy at the phase transition (F660).{{sfn|Nakakuki|Mura|2013}} The unique interplay of these forces is what generates slab rollback. When the deep slab section obstructs the down-going motion of the shallow slab section, slab rollback occurs. The subducting slab undergoes backward sinking due to the negative buoyancy forces causing a retrogradation of the trench hinge along the surface. Upwelling of the mantle around the slab can create favorable conditions for the formation of a back-arc basin.{{sfn|Flower|Dilek|2003}}Seismic tomography provides evidence for slab rollback. Results demonstrate high temperature anomalies within the mantle suggesting subducted material is present in the mantle.{{sfn|Hall|Spakman|2002}} Ophiolites are viewed as evidence for such mechanisms as high pressure and temperature rocks are rapidly brought to the surface through the processes of slab rollback, which provides space for the exhumation of ophiolites.Slab rollback is not always a continuous process suggesting an episodic nature.{{sfn|Schellart|Lister|Toy|2006}} The episodic nature of the rollback is explained by a change in the density of the subducting plate, such as the arrival of buoyant lithosphere (a continent, arc, ridge, or plateau), a change in the subduction dynamics, or a change in the plate kinematics. The age of the subducting plates does not have any effect on slab rollback.{{sfn|Nakakuki|Mura|2013}} Nearby continental collisions have an effect on slab rollback. Continental collisions induce mantle flow and extrusion of mantle material, which causes stretching and arc-trench rollback.{{sfn|Flower|Dilek|2003}} In the area of the Southeast Pacific, there have been several rollback events resulting in the formation of numerous back-arc basins.{{sfn|Schellart|Lister|Toy|2006}}

Mantle interactions

Interactions with the mantle discontinuities play a significant role in slab rollback. Stagnation at the 660-km discontinuity causes retrograde slab motion due to the suction forces acting at the surface.{{sfn|Nakakuki|Mura|2013}} Slab rollback induces mantle return flow, which causes extension from the shear stresses at the base of the overriding plate. As slab rollback velocities increase, circular mantle flow velocities also increase, accelerating extension rates.{{sfn|Schellart|Moresi|2013}} Extension rates are altered when the slab interacts with the discontinuities within the mantle at 410 km and 660 km depth. Slabs can either penetrate directly into the lower mantle, or can be retarded due to the phase transition at 660 km depth creating a difference in buoyancy. An increase in retrograde trench migration (slab rollback) (2–4 cm/yr) is a result of flattened slabs at the 660-km discontinuity where the slab does not penetrate into the lower mantle.{{sfn|Christensen|1996}} This is the case for the Japan, Java and Izu–Bonin trenches. These flattened slabs are only temporarily arrested in the transition zone. The subsequent displacement into the lower mantle is caused by slab pull forces, or the destabilization of the slab from warming and broadening due to thermal diffusion. Slabs that penetrate directly into the lower mantle result in slower slab rollback rates (~1–3 cm/yr) such as the Mariana arc, Tonga arcs.{{sfn|Christensen|1996}}

Hydrothermal activity and associated biomes

As sediments are subducted at the bottom of trenches, much of their fluid content is expelled and moves back along the subduction décollement to emerge on the inner slope as mud volcanoes and cold seeps. Methane clathrates and gas hydrates also accumulate in the inner slope, and there is concern that their breakdown could contribute to global warming.{{sfn|Stern|2005}}The fluids released at mud volcanoes and cold seeps are rich in methane and hydrogen sulfide, providing chemical energy for chemotrophic microorganisms that form the base of a unique trench biome. Cold seep communities have been identified in the inner trench slopes of the western Pacific (especially Japan{{sfn|Fujikura | Lindsay | Kitazato | Nishida | 2010 }}), South America, Barbados, the Mediterranean, Makran, and the Sunda trench. These are found at depths as great as {{convert|6000|m|sigfig=1|sp=us}}.{{sfn|Stern|2005}} The genome of the extremophile Deinococcus from Challenger Deep has sequenced for its ecological insights and potential industrial uses.{{sfn|Zhang |Huang |Qin |Quan |2021}}Because trenches are the lowest points in the ocean floor, there is concern that plastic debris may accumulate in trenches and endanger the fragile trench biomes.{{sfn|Peng |Bellerby |Zhang |Sun |2020}}

Deepest oceanic trenches

Recent measurements, where the salinity and temperature of the water was measured throughout the dive, have uncertainties of about {{Convert|15|m|ft|abbr=on}}.{{sfn|Amos|2021}} Older measurements may be off by hundreds of meters.{| class=“wikitable”! Trench! Ocean! Lowest Point! Maximum Depth! Source| Mariana Trench| Pacific Ocean| Challenger Deep

10984	ft|abbr=on}}	Amos|2021}}

| Tonga Trench| Pacific Ocean| Horizon Deep

10820	ft|abbr=on}}	Amos|2021}}

| Philippine Trench| Pacific Ocean| Emden Deep

10540	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| Kuril–Kamchatka Trench| Pacific Ocean|

10542	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| Kermadec Trench| Pacific Ocean|

10047	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| Izu–Bonin Trench (Izu–Ogasawara Trench)| Pacific Ocean|

9810	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| New Britain Trench| Pacific Ocean (Solomon Sea)| Planet Deep

9140	ft|abbr=on}}	Gallo	Hardy	2015}}

| Puerto Rico Trench| Atlantic Ocean| Brownson Deep

8,380	ft|abbr=on}}	Amos|2021}}

| South Sandwich Trench| Atlantic Ocean| Meteor Deep

8265	ft|abbr=on}}	Amos|2021}}

| Peru–Chile Trench or Atacama Trench| Pacific Ocean| Richards Deep

8055	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| Japan Trench| Pacific Ocean|| 8,412 m (27,498 ft)

Jamieson	Mayor |Solan`2010}}

| Cayman Trench| Atlantic Ocean| Caribbean Deep

7686	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| Sunda Trench| Indian Ocean| Java Deep

7450	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| MauritiusTrench| Indian Ocean| Mauritius Point

6875	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| IndiaTrench| Indian Ocean| Between India & Maldives

7225	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| CeylonTrench | Indian Ocean| Sri Lanka Deep

6400	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| SomaliaTrench| Indian Ocean| Somali Deep

6084	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| MadagascarTrench| Indian Ocean| Madagascar Deep

6048	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

| Puerto Rico Trench| Atlantic Ocean| Rio Bermuda Deep

5625	ft|abbr=on}}	Jamieson	Mayor |Solan`2010}}

“>

Notable oceanic trenches {| class“wikitable”

! Trench !! Location| Aleutian Trench| South of the Aleutian Islands, west of Alaska|Bougainville Trench|South of New Guinea| Cayman Trench| Western Caribbean| Cedros Trench (inactive)| Pacific coast of Baja California| Hikurangi Trench| East of New Zealand| Hjort Trench| Southwest of New Zealand| Izu–Ogasawara Trench

Izu Islands>Izu and Bonin islands

| Japan Trench| East of Japan| Kermadec Trench *| Northeast of New Zealand| Kuril–Kamchatka Trench *| Near Kuril islands| Manila Trench| West of Luzon, Philippines| Mariana Trench *| Western Pacific Ocean; east of Mariana Islands| Middle America Trench| Eastern Pacific Ocean; off coast of Mexico, Guatemala, El Salvador, Nicaragua, Costa Rica| New Hebrides Trench| West of Vanuatu (New Hebrides Islands).| Peru–Chile Trench| Eastern Pacific Ocean; off coast of Peru & Chile| Philippine Trench *| East of the Philippines| Puerto Rico Trench| Boundary of Caribbean and Atlantic Ocean| Puysegur trench| Southwest of New Zealand| Ryukyu Trench| Eastern edge of Japan’s Ryukyu Islands| South Sandwich Trench| East of the South Sandwich Islands | Sunda Trench | Curves from south of Java to west of Sumatra and the Andaman and Nicobar Islands| Tonga Trench *| Near Tonga| Yap Trench| Western Pacific Ocean; between Palau Islands and Mariana Trench(*) The five deepest trenches in the world

Ancient oceanic trenches

{| class=“wikitable”! Trench !! Location| Intermontane Trench| Western North America; between the Intermontane Islands and North America| Insular Trench| Western North America; between the Insular Islands and the Intermontane Islands| Farallon Trench| Western North America| Tethys Trench| South of Turkey, Iran, Tibet and Southeast Asia

See also

• List of landforms
• List of submarine topographical features
• Mid-ocean ridge
• Physical oceanography
• Ring of Fire

References

{{reflist|2}}

Bibliography

• JOURNAL, Allwrardt, Allan O., Evolution of the tectogene concept, 1930–1965, Proceedings of the Fifth International Congress on the History of Oceanography, 1993,aquadocs.org/bitstream/handle/1834/27437/Allwardt_on_tectogenes.pdf?sequence=1&isAllowed=y, 29 September 2021,
• NEWS, Amos, Jonathan, Oceans’ extreme depths measured in precise detail,www.bbc.com/news/science-environment-57063396, 2 October 2021, News, BBC, 11 May 2021,
• JOURNAL, Bangs, N. L., Morgan, J. K., Tréhu, A. M., Contreras-Reyes, E., Arnulf, A. F., Han, S., Olsen, K. M., Zhang, E., Basal Accretion Along the South Central Chilean Margin and Its Relationship to Great Earthquakes, Journal of Geophysical Research: Solid Earth, November 2020, 125, 11, 10.1029/2020JB019861, 2020JGRB..12519861B, 225154312,
• JOURNAL, Bodine, J.H., Watts, A.B>, On lithospheric flexure seaward of the Bonin and Mariana trenches, Earth and Planetary Science Letters, 1979, 43, 1, 132–148, 10.1016/0012-821X(79)90162-6, 1979E&PSL..43..132B,
• JOURNAL

• JOURNAL, Dastanpour, Mohammad, The Devonian System in Iran: a review, Geological Magazine, March 1996, 133, 2, 159–170, 10.1017/S0016756800008670, 1996GeoM..133..159D, 129199671,
• JOURNAL, Dvorkin, Jack, Nur, Amos, Mavko, Gary, Gary M. Mavko, Ben-Avraham, Zvi, Narrow subducting slabs and the origin of backarc basins, Tectonophysics, 1993, 227, 1–4, 63–79, 10.1016/0040-1951(93)90087-Z, 1993Tectp.227...63D, free,
• BOOK, Einsele, Gerhard, Sedimentary Basins: Evolution, Facies, and Sediment Budget,archive.org/details/sedimentarybasin00eins, limited, Springer, 2nd, 2000, 630, 978-3-540-66193-1,
• BOOK, Eiseley, Loren, The Immense Journey,archive.org/details/immensejourney00eiserich, registration, 1946, Vintage Books, United States, 0-394-70157-7, 38–41, 1959, Loren Eiseley, The Great Deeps,
• BOOK, Ellouz-Zimmermann, N., Deville, E., Müller, C., Lallemant, S., Subhani, A. B., Tabreez, A. R., Thrust Belts and Foreland Basins, Impact of Sedimentation on Convergent Margin Tectonics: Example of the Makran Accretionary Prism (Pakistan), Frontiers in Earth Sciences, 2007, 327–350, 10.1007/978-3-540-69426-7_17, 978-3-540-69425-0,
• JOURNAL, Fujikura, K., Lindsay, D., Kitazato, H., Nishida, S., Shirayama, Y., 2010, Marine Biodiversity in Japanese Waters, PLoS ONE, 5, 8, e11836, 10.1371/journal.pone.0011836, 20689840, 2914005, 2010PLoSO...511836F, free,
• ENCYCLOPEDIA, Deep-sea trench, McGraw-Hill Encyclopedia of Science & Technology, 8th, 1997,
• JOURNAL

pages = 21–41, 10.1144/gsl.sp.2003.218.01.03 s2cid = 128899276,

• BOOK, Fisher, R. L., Hess, H. H., M. N. Hill, 1963, Trenches, The Sea v. 3 The Earth Beneath the Sea, New York, Wiley-Interscience, 411–436,
• JOURNAL, Gallo, N.D., Cameron, J, Hardy, K., Fryer, P., Bartlett, D.H., Levin, L.A., 2015, Submersible- and lander-observed community patterns in the Mariana and New Britain trenches: Influence of productivity and depth on epibenthic and scavenging communities, Deep Sea Research Part I: Oceanographic Research Papers, 99, 119–133, 10.1016/j.dsr.2014.12.012, 2015DSRI...99..119G, free,
• JOURNAL, Garfunkel, Z, Anderson, C. A., Schubert, G, Mantle circulation and the lateral migration of subducted slabs, Journal of Geophysical Research: Solid Earth, 10 June 1986, 91, B7, 7205–7223, 10.1029/JB091iB07p07205, 1986JGR....91.7205G,zenodo.org/record/1231408,
• BOOK, Geersen, Jacob, Voelker, David, Behrmann, Jan H., Submarine Geomorphology, Oceanic Trenches, Springer Geology, 2018, 409–424, 10.1007/978-3-319-57852-1_21, 978-3-319-57851-4,
• JOURNAL, Goldfinger, Chris, Nelson, C. Hans, Morey, Ann E., Johnson, Joel E., Patton, Jason R., Karabanov, Eugene B., Gutierrez-Pastor, Julia, Eriksson, Andrew T., Gracia, Eulalia, Dunhill, Gita, Enkin, Randolph J., Dallimore, Audrey, Vallier, Tracy, Kayen, Robert, Turbidite event history—Methods and implications for Holocene paleoseismicity of the Cascadia subduction zone, U.S. Geological Survey Professional Paper, Professional Paper, 2012, 1661-E, 10.3133/pp1661F, free,
• JOURNAL, Hackney, Ron, Sutherland, Rupert, Collot, Julien, Rifting and subduction initiation history of the New Caledonia Trough, southwest Pacific, constrained by process-oriented gravity models: Gravity modelling of the New Caledonia Trough, Geophysical Journal International, June 2012, 189, 3, 1293–1305, 10.1111/j.1365-246X.2012.05441.x, free,
• JOURNAL

bibcode = 2002E&PSL.201..321H s2cid = 129884170

• NEWS, Hamilton, W. B., 1988, Plate tectonics and island arcs, Geological Society of America Bulletin, 100, 10, 1503–1527,
• JOURNAL, Harris, P.T., MacMillan-Lawler, M., Rupp, J., Baker, E.K., 2014, Geomorphology of the oceans, Marine Geology, 352, 4–24, 10.1016/j.margeo.2014.01.011, 2014MGeol.352....4H,
• JOURNAL, Hawkins, J. W., Bloomer, S. H., Evans, C. A., Melchior, J. T., 1984, Evolution of Intra-Oceanic Arc-Trench Systems, Tectonophysics, 102, 1–4, 175–205, 10.1016/0040-1951(84)90013-1, 1984Tectp.102..175H,
• JOURNAL, Jamieson, A.J., Fujii, T., Mayor, D.J., Solan`, M., Priede, I.G., 2010, Hadal trenches: the ecology of the deepest places on Earth, Trends in Ecology & Evolution, 25, 3, 190–197, 10.1016/j.tree.2009.09.009, 19846236,
• JOURNAL, Jarrard, R. D., 1986, Relations among subduction parameters, Reviews of Geophysics, 24, 2, 217–284, 10.1029/RG024i002p00217, 1986RvGeo..24..217J,
• BOOK, Johnstone, James, An Introduction to Oceanography, With Special Reference to Geography and Geophysics, 1923, Creative Media Partners, LLC, 978-1-340-39958-0,
• BOOK, Kearey, P., Klepeis, K.A., Vine, F.J., Global tectonics., 2009, Wiley-Blackwell, Oxford, 978-1-4051-0777-8, 184–188, 3rd,
• BOOK, Ladd, J.W., Holcombe, T. L., Westbrook, G. K., Edgar, N. T., Dengo, G., Case, J., 1990, Caribbean Marine Geology: Active margins of the plate boundary, The Geology of North America, H: The Caribbean Region, Geological Society of America, 261–290,
• JOURNAL, Lemenkova, Paulina, Topography of the Aleutian Trench south-east off Bowers Ridge, Bering Sea, in the context of the geological development of North Pacific Ocean, Baltica, 2021, 34, 1, 27–46, 10.5200/baltica.2021.1.3, 3854076, 247031368, free,
• JOURNAL, McConnell, A., 1990, The art of submarine cable- laying: its contribution to physical oceanography, Deutsche hydrographische Zeitschrift, Erganzungs-heft, (B), 22, 467–473,
• JOURNAL

,

• JOURNAL, Peng, Guyu, Bellerby, Richard, Zhang, Feng, Sun, Xuerong, Li, Daoji, The ocean’s ultimate trashcan: Hadal trenches as major depositories for plastic pollution, Water Research, January 2020, 168, 115121, 10.1016/j.watres.2019.115121, 31605833, 2020WatRe.16815121P, 204122125, 11250/2677323, free,
• JOURNAL, Rowley, David B., Rate of plate creation and destruction: 180 Ma to present, Geological Society of America Bulletin, 2002, 114, 8, 927–933, 10.1130/0016-7606(2002)1142.0.CO;2, 2002GSAB..114..927R,
• JOURNAL

,

• JOURNAL

• JOURNAL

bibcode = 2013JGRB..118.3221S, free,

• JOURNAL, Scholl, D. W., 1993, The return of sialic material to the mantle indicated by terrigeneous material subducted at convergent margins,zenodo.org/record/1258262, Tectonophysics, 219, 1–3, 163–175, 10.1016/0040-1951(93)90294-T, Scholl, D, 1993Tectp.219..163V,
• JOURNAL, Sibuet, M., Olu, K., 1998, Biogeography, biodiversity and fluid dependence of deep-sea cold-seep communities at active and passive margins, Deep-Sea Research, II, 45, 517–567, 1998DSRII..45..517S, 10.1016/S0967-0645(97)00074-X,
• JOURNAL, Smith, W. H. F., Sandwell, D. T., 1997, Global sea floor topography from satellite altimetry and ship depth soundings, Science, 277, 5334, 1956–1962, 10.1126/science.277.5334.1956,
• JOURNAL, Stern, R. J., 2002, Subduction Zones, Reviews of Geophysics, 40, 4, 1012–1049, 10.1029/2001RG000108, 2002RvGeo..40.1012S, 247695067, free,
• JOURNAL, Stern, R.J., TECTONICS {{!, Ocean Trenches |journal=Encyclopedia of Geology |date=2005 |pages=428–437 |doi=10.1016/B0-12-369396-9/00141-6|isbn=978-0-12-369396-9 }}
• BOOK, Thomas, C., Burbidge, D., Cummins, P., 2007, A preliminary study into the tsunami hazard faced by southwest Pacific nations, Risk and Impact Analysis Group, Geoscience Australia,www.researchgate.net/publication/267818809, 26 September 2021,
• WEB, Thomson, C.W., Murray, J., 1895,www.19thcenturyscience.org/HMSC/HMSC-Reports/1895-Summary/htm/doc877.html, Report on the scientific results of the voyage of H.M.S. Challenger during the years of 1872–76 (page 877), 19thcenturyscience.org, 26 March 2012, 17 April 2012,www.19thcenturyscience.org/HMSC/HMSC-Reports/1895-Summary/htm/doc877.html," title="web.archive.org/web/20120417095912www.19thcenturyscience.org/HMSC/HMSC-Reports/1895-Summary/htm/doc877.html,">web.archive.org/web/20120417095912www.19thcenturyscience.org/HMSC/HMSC-Reports/1895-Summary/htm/doc877.html, live,
• JOURNAL, Völker, David, Geersen, Jacob, Contreras-Reyes, Eduardo, Sellanes, Javier, Pantoja, Silvio, Rabbel, Wolfgang, Thorwart, Martin, Reichert, Christian, Block, Martin, Weinrebe, Wilhelm Reimer, Morphology and geology of the continental shelf and upper slope of southern Central Chile (33°S–43°S), International Journal of Earth Sciences, October 2014, 103, 7, 1765–1787, 10.1007/s00531-012-0795-y, 2014IJEaS.103.1765V, 129460412,oceanrep.geomar.de/13536/1/2012_Voelker_etal_IJES_531_2012_795_Author.pdf,
• JOURNAL, 10.5194/adgeo-22-155-2009, Mass wasting at the base of the south central Chilean continental margin: The Reloca Slide, 2009, Völker, D., Weinrebe, W., Behrmann, J. H., Bialas, J., Klaeschen, D., Advances in Geosciences, 22, 155–167, 2009AdG....22..155V, free,
• JOURNAL, 10.1144/jgs2012-119, Sedimentary fill of the Chile Trench (32–46°S): Volumetric distribution and causal factors, 2013, Völker, David, Geersen, Jacob, Contreras-Reyes, Eduardo, Reichert, Christian, Journal of the Geological Society, 170, 5, 723–736, 2013JGSoc.170..723V, 128432525,
• BOOK, Watts, A.B., 2001, Isostasy and Flexure of the Lithosphere, Cambridge University Press, 458p.
• BOOK, Weyl, Peter K., Oceanography: an introduction to the marine environment, 1969, Wiley, New York, 978-0-471-93744-9,
• JOURNAL, Westbrook, G.K., Mascle, A., Biju-Duval, B., 1984, Geophysics and the structure of the Lesser Antilles forearc, Initial Reports of the Deep Sea Drilling Project, 78, 23–38,deepseadrilling.org/78a/volume/dsdp78a_02.pdf, 26 September 2021,
• JOURNAL, Wright, D. J., Bloomer, S. H., MacLeod, C. J., Taylor, B., Goodlife, A. M., 2000, Bathymetry of the Tonga Trench and Forearc: a map series, Marine Geophysical Researches, 21, 489–511, 2000, 10.1023/A:1026514914220, 2000MarGR..21..489W, 6072675,
• JOURNAL, Zhang, Ru-Yi, Huang, Ying, Qin, Wen-Jing, Quan, Zhe-Xue, The complete genome of extracellular protease-producing Deinococcus sp. D7000 isolated from the hadal region of Mariana Trench Challenger Deep, Marine Genomics, June 2021, 57, 100832, 10.1016/j.margen.2020.100832, 33867118, 2021MarGn..5700832Z, 229392459,

External links

• WEB,hadex.whoi.edu/, HADEX: Research project to explore ocean trenches, Woods Hole Oceanographic Institution,
• WEB,www.whoi.edu/know-your-ocean/ocean-topics/seafloor-below/ocean-trenches/, Ocean Trenches, Woods Hole Oceanographic Institution,

{{physical oceanography|expanded=other}}{{Authority control}}