{{short description|Form of electromagnetic radiation}}{{Other uses}}File:Ir girl.png|thumb|A false-color image of two people taken in long-wavelength infrared (body-temperature thermal) radiation.]]File:Wide-field Infrared Survey Explorer first-light image.jpg|thumb|right|This pseudocolor infrared space telescope image has blue, green, and red corresponding to wavelengths of 3.4, 4.6, and 12 Î¼m, respectively.]]Infrared (IR; sometimes called infrared light) is electromagnetic radiation (EMR) with wavelengths longer than that of visible light but shorter than microwaves. The infrared spectral band begins with waves that are just longer than those of red light, the longest waves in the visible spectrum, so IR is invisible to the human eye. IR is generally understood to include wavelengths from around 750 nm to 1 mm (frequencies of 400 THz to 300 GHz).JOURNAL, Vatansever, Fatma, Hamblin, Michael R., 2012-01-01, Far infrared radiation (FIR): Its biological effects and medical applications, Photonics & Lasers in Medicine, 1, 4, 255â€“266, 10.1515/plm-2012-0034, 2193-0643, 3699878, 23833705, BOOK,weblink Infrared Radiation, 2012-02-10, InTech, 978-953-51-0060-7, Morozhenko, Vasyl, en, 10.5772/2031, IR is commonly divided between longer-wavelength thermal IR, emitted from terrestrial sources, and shorter-wavelength IR or near-IR, part of the solar spectrum.WEB,weblink IPCC AR4 SYR Appendix Glossary, 2008-12-14, dead,weblink" title="web.archive.org/web/20181117121314weblink">weblink 2018-11-17, Longer IR wavelengths (30â€“100 Î¼m) are sometimes included as part of the terahertz radiation band.BOOK, Rogalski, Antoni, Infrared and terahertz detectors, 2019, CRC Press, Boca Raton, FL, 9781315271330, 929, 3rd, Almost all black-body radiation from objects near room temperature is in the IR band. As a form of electromagnetic radiation, IR carries energy and momentum, exerts radiation pressure, and has properties corresponding to both those of a wave and of a particle, the photon.It was long known that fires emit invisible heat; in 1681 the pioneering experimenter Edme Mariotte showed that glass, though transparent to sunlight, obstructed radiant heat.WEB, Calel, Raphael, 19 February 2014, The Founding Fathers v. The Climate Change Skeptics,weblink 16 September 2019, The Public Domain Review, WEB, Fleming, James R., 17 March 2008, Climate Change and Anthropogenic Greenhouse Warming: A Selection of Key Articles, 1824â€“1995, with Interpretive Essays,weblink 1 February 2022, National Science Digital Library Project Archive PALE:ClassicArticles, Article 1: General remarks on the temperature of the earth and outer space. In 1800 the astronomer Sir William Herschel discovered that infrared radiation is a type of invisible radiation in the spectrum lower in energy than red light, by means of its effect on a thermometer.Michael Rowan-Robinson (2013). Night Vision: Exploring the Infrared Universe. Cambridge University Press. p. 23. {{ISBN|1107024765}}. Slightly more than half of the energy from the Sun was eventually found, through Herschel's studies, to arrive on Earth in the form of infrared. The balance between absorbed and emitted infrared radiation has an important effect on Earth's climate. Infrared radiation is emitted or absorbed by molecules when changing rotational-vibrational movements. It excites vibrational modes in a molecule through a change in the dipole moment, making it a useful frequency range for study of these energy states for molecules of the proper symmetry. Infrared spectroscopy examines absorption and transmission of photons in the infrared range.WEB, Reusch, William, 1999,weblink Infrared Spectroscopy, Michigan State University, 2006-10-27, dead,weblink" title="web.archive.org/web/20071027110406weblink">weblink 2007-10-27, Infrared radiation is used in industrial, scientific, military, commercial, and medical applications. Night-vision devices using active near-infrared illumination allow people or animals to be observed without the observer being detected. Infrared astronomy uses sensor-equipped telescopes to penetrate dusty regions of space such as molecular clouds, to detect objects such as planets, and to view highly red-shifted objects from the early days of the universe.WEB,weblink IR Astronomy: Overview, NASA Infrared Astronomy and Processing Center, 2006-10-30, dead,weblink" title="web.archive.org/web/20061208151300weblink">weblink 2006-12-08, Infrared thermal-imaging cameras are used to detect heat loss in insulated systems, to observe changing blood flow in the skin, to assist firefighting, and to detect the overheating of electrical components.WEB, Chilton, Alexander, 2013-10-07, The Working Principle and Key Applications of Infrared Sensors,weblink 2020-07-11, AZoSensors, en, Military and civilian applications include target acquisition, surveillance, night vision, homing, and tracking. Humans at normal body temperature radiate chiefly at wavelengths around 10 Î¼m. Non-military uses include thermal efficiency analysis, environmental monitoring, industrial facility inspections, detection of grow-ops, remote temperature sensing, short-range wireless communication, spectroscopy, and weather forecasting.

Definition and relationship to the electromagnetic spectrum

There is no universally accepted definition of the range of infrared radiation. Typically, it is taken to extend from the nominal red edge of the visible spectrum at 700 nm to 1 mm. This range of wavelengths corresponds to a frequency range of approximately 430 THz down to 300 GHz. Beyond infrared is the microwave portion of the electromagnetic spectrum. Increasingly, terahertz radiation is counted as part of the microwave band, not infrared, moving the band edge of infrared to 0.1 mm (3 THz).{| class=wikitable style="float:center; margin:2px; text-align:center;"Electromagnetic spectrum>Light comparisonBOOK, Haynes, Haynes, William M., 2011, CRC Handbook of Chemistry and Physics, 92nd, CRC Press, 978-1-4398-5511-9, 10.233, ! Name || Wavelength || Frequency (Hz) || Photon energy (eV)

Gamma ray >

| more than 124 keV

X-ray >

| 124 keV â€“ 124 eV

Ultraviolet >

| 124 eV â€“ 3.3 eV

Visible light>Visible

400 nm â€“ 700 nm

430 THz â€“ 750 THz

3.3 eV â€“ 1.7 eV

style="background:#FFE8E8;"

Infrared >

| 1.7 eV â€“ 1.24 meV

Microwave >

| 1.24 meV â€“ 1.24 Î¼eV

Radio waves>Radio

1 meter and more

300 MHz and below

1.24 Î¼eV and below

Nature

Sunlight, at an effective temperature of 5,780 K (5,510 Â°C, 9,940 Â°F), is composed of near-thermal-spectrum radiation that is slightly more than half infrared. At zenith, sunlight provides an irradiance of just over 1 kW per square meter at sea level. Of this energy, 527 W is infrared radiation, 445 W is visible light, and 32 W is ultraviolet radiation.WEB,weblink Reference Solar Spectral Irradiance: Air Mass 1.5, 2009-11-12, Nearly all the infrared radiation in sunlight is near infrared, shorter than 4 Î¼m.On the surface of Earth, at far lower temperatures than the surface of the Sun, some thermal radiation consists of infrared in the mid-infrared region, much longer than in sunlight. Black-body, or thermal, radiation is continuous: it radiates at all wavelengths. Of these natural thermal radiation processes, only lightning and natural fires are hot enough to produce much visible energy, and fires produce far more infrared than visible-light energy.WEB,weblink Blackbody Radiation | Astronomy 801: Planets, Stars, Galaxies, and the Universe,

Regions

In general, objects emit infrared radiation across a spectrum of wavelengths, but sometimes only a limited region of the spectrum is of interest because sensors usually collect radiation only within a specific bandwidth. Thermal infrared radiation also has a maximum emission wavelength, which is inversely proportional to the absolute temperature of object, in accordance with Wien's displacement law. The infrared band is often subdivided into smaller sections, although how the IR spectrum is thereby divided varies between different areas in which IR is employed.

Visible limit

Infrared radiation is generally considered to begin with wavelengths longer than visible by the human eye. There is no hard wavelength limit to what is visible, as the eye's sensitivity decreases rapidly but smoothly, for wavelengths exceeding about 700 nm. Therefore wavelengths just longer than that can be seen if they are sufficiently bright, though they may still be classified as infrared according to usual definitions. Light from a near-IR laser may thus appear dim red and can present a hazard since it may actually be quite bright. And even IR at wavelengths up to 1,050 nm from pulsed lasers can be seen by humans under certain conditions.JOURNAL, Sliney, David H., Wangemann, Robert T., Franks, James K., Wolbarsht, Myron L., 1976, Visual sensitivity of the eye to infrared laser radiation, Journal of the Optical Society of America, 66, 4, 339â€“341, 10.1364/JOSA.66.000339, 1262982, The foveal sensitivity to several near-infrared laser wavelengths was measured. It was found that the eye could respond to radiation at wavelengths at least as far as 1064 nm. A continuous 1064 nm laser source appeared red, but a 1060 nm pulsed laser source appeared green, which suggests the presence of second harmonic generation in the retina., 1976JOSA...66..339S, BOOK, Lynch, David K., Livingston, William Charles, Color and Light in Nature,weblink 12 October 2013, 2nd, 2001, Cambridge University Press, Cambridge, UK, 978-0-521-77504-5, 231, Limits of the eye's overall range of sensitivity extends from about 310 to 1,050 nanometers, JOURNAL, Saidman, Jean, 15 May 1933, Sur la visibilitÃ© de l'ultraviolet jusqu'Ã la longueur d'onde 3130, The visibility of the ultraviolet to the wave length of 3130, Comptes rendus de l'AcadÃ©mie des sciences, 196, 1537â€“9, fr,weblink

Commonly used subdivision scheme

A commonly used subdivision scheme is:BOOK, Byrnes, James, Unexploded Ordnance Detection and Mitigation, Springer, 2009, 21â€“22, 978-1-4020-9252-7, 2009uodm.book.....B, WEB, Infrared Light,weblink RP Photonics Encyclopedia, RP Photonics, 20 July 2021, {| class="wikitable"! Division name! Abbreviation! Wavelength! Frequency! Photon energy! Temperature{{efn-lr|name=â€ |Temperatures of black bodies for which spectral peaks fall at the given wavelengths, according to the wavelength form of Wien's displacement lawWEB, Peaks of Blackbody Radiation Intensity,weblink 27 July 2016, }}! Characteristics

! Near-infrared|NIR, IR-A DIN| 0.75â€“1.4 Î¼m

Terahertz (unit)>THz| 886â€“1,653 meV

3864

2070

disp=br()}}

Electromagnetic absorption by water>water absorption band, and commonly used in fiber optic telecommunication because of low attenuation losses in the SiO2 glass (silica) medium. Image intensifiers are sensitive to this area of the spectrum; examples include night vision devices such as night vision goggles. Near-infrared spectroscopy is another common application.

! Short-wavelength infrared| SWIR, IR-B DIN| 1.4â€“3 Î¼m| 100â€“214 THz| 413â€“886 meV

2070

966

disp=br()}}

Fiber-optic communication#Transmission windows>transmission windows).

! {{anchor|MidIR|MWIR|IIR|IR-C}} Mid-wavelength infrared

DIN; MidIR.AUGUST 14, 2012

PERIODICAL=R&D MAGAZINE

URL=HTTP://WWW.RDMAG.COM/NEWS/2012/08/CHEMISTRY-TEST-MEASUREMENT-PHOTONICS-PHOTOACOUSTIC-TECHNIQUE-HEARS-THE-SOUND-OF-DANGEROUS-CHEMICAL-AGENTS/?ET_CID=2797047&ET_RID=54719290&LINKID=HTTP%3A%2F%2FWWW.RDMAG.COM%2FNEWS%2F2012%2F08%2FCHEMISTRY-TEST-MEASUREMENT-PHOTONICS-PHOTOACOUSTIC-TECHNIQUE-HEARS-THE-SOUND-OF-DANGEROUS-CHEMICAL-AGENTS, September 8, 2012, Also called intermediate infrared (IIR)| 3â€“8 Î¼m| 37â€“100 THz| 155â€“413 meV

966

362

disp=br()}}| In guided missile technology the 3â€“5 Î¼m portion of this band is the atmospheric window in which the seekers of passive IR 'heat seeking' missiles are designed to work, homing on to the Infrared signature of the target aircraft, typically the jet engine exhaust plume. This region is also known as thermal infrared.

! Long-wavelength infrared| LWIR, IR-C DIN| 8â€“15 Î¼m| 20â€“37 THz| 83â€“155 meV

362

193

disp=br()}}| The "thermal imaging" region, in which sensors can obtain a completely passive image of objects only slightly higher in temperature than room temperature â€“ for example, the human body â€“ based on thermal emissions only and requiring no illumination such as the sun, moon, or infrared illuminator. This region is also called the "thermal infrared".

! Far-infrared| FIR| 15â€“1,000 Î¼m| 0.3â€“20 THz| 1.2â€“83 meV

193

disp=br()}}

far-infrared laser and Far infrared>far-infrared)

{{thermal image comparison}}NIR and SWIR together is sometimes called "reflected infrared", whereas MWIR and LWIR is sometimes referred to as "thermal infrared".

CIE division scheme

The International Commission on Illumination (CIE) recommended the division of infrared radiation into the following three bands:WEB, Henderson, Roy,weblink Wavelength considerations, Instituts fÃ¼r Umform- und Hochleistungs, 2007-10-18,weblink" title="web.archive.org/web/20071028072110weblink">weblink 2007-10-28, WEB, CIE (International Commission on Illumination), infrared radiation IR radiation IRR,weblink 17-21-004, 18 October 2022, {| class="wikitable"! Abbreviation! Wavelength! Frequency

| 215 â€“ 430 THz

| 100 â€“ 215 THz

| 300 â€“ 100 THz

ISO 20473 scheme

ISO 20473 specifies the following scheme:ISO STANDARD, 39482, ISO 20473:2007 â€“ Optics and photonics â€“ Spectral bands, {| class="wikitable"! style="width:100pt; text-align:left;"| Designation! style="width:100pt; text-align:center;"| Abbreviation! style="width:150pt; text-align:center;"| Wavelength

Near-infrared

NIR

0.78â€“3 Î¼m

Mid-infrared

MIR

3â€“50 Î¼m

Far-infrared

FIR

50â€“1,000 Î¼m

Astronomy division scheme

Astronomers typically divide the infrared spectrum as follows:WEB,weblink Near, Mid and Far-Infrared, NASA IPAC, 2007-04-04, dead,weblink" title="archive.today/20120529weblink">weblink 2012-05-29, {| class="wikitable"! style="width:100pt; text-align:left;"| Designation! style="width:100pt; text-align:center;"| Abbreviation! style="width:150pt; text-align:center;"| Wavelength

Near-infrared

NIR

0.7 to 2.5 Î¼m

Mid-infrared

MIR

3 to 25 Î¼m

Far-infrared

FIR

above 25 Î¼m.

These divisions are not precise and can vary depending on the publication. The three regions are used for observation of different temperature ranges,WEB, Near, Mid and Far-Infrared,weblink 2024-03-28, www.icc.dur.ac.uk, and hence different environments in space.The most common photometric system used in astronomy allocates capital letters to different spectral regions according to filters used; I, J, H, and K cover the near-infrared wavelengths; L, M, N, and Q refer to the mid-infrared region. These letters are commonly understood in reference to atmospheric windows and appear, for instance, in the titles of many papers.

Sensor response division scheme

(File:Atmosfaerisk spredning-en.svg|thumb|Plot of atmospheric transmittance in part of the infrared region)A third scheme divides up the band based on the response of various detectors:Miller, Principles of Infrared Technology (Van Nostrand Reinhold, 1992), and Miller and Friedman, Photonic Rules of Thumb, 2004. {{ISBN|978-0-442-01210-6}}{{Page needed|date=September 2010}}

Near-infrared: from 0.7 to 1.0 Î¼m (from the approximate end of the response of the human eye to that of silicon).
Short-wave infrared: 1.0 to 3 Î¼m (from the cut-off of silicon to that of the MWIR atmospheric window). InGaAs covers to about 1.8 Î¼m; the less sensitive lead salts cover this region. Cryogenically cooled MCT detectors can cover the region of 1.0â€“2.5{{nbsp}}Î¼m.
Mid-wave infrared: 3 to 5 Î¼m (defined by the atmospheric window and covered by indium antimonide, InSb and mercury cadmium telluride, HgCdTe, and partially by lead selenide, PbSe).
Long-wave infrared: 8 to 12, or 7 to 14 Î¼m (this is the atmospheric window covered by HgCdTe and microbolometers).
Very-long wave infrared (VLWIR) (12 to about 30 Î¼m, covered by doped silicon).

Near-infrared is the region closest in wavelength to the radiation detectable by the human eye. mid- and far-infrared are progressively further from the visible spectrum. Other definitions follow different physical mechanisms (emission peaks, vs. bands, water absorption) and the newest follow technical reasons (the common silicon detectors are sensitive to about 1,050 nm, while InGaAs's sensitivity starts around 950 nm and ends between 1,700 and 2,600 nm, depending on the specific configuration). No international standards for these specifications are currently available.The onset of infrared is defined (according to different standards) at various values typically between 700 nm and 800 nm, but the boundary between visible and infrared light is not precisely defined. The human eye is markedly less sensitive to light above 700 nm wavelength, so longer wavelengths make insignificant contributions to scenes illuminated by common light sources. Particularly intense near-IR light (e.g., from lasers, LEDs or bright daylight with the visible light filtered out) can be detected up to approximately 780 nm, and will be perceived as red light. Intense light sources providing wavelengths as long as 1,050 nm can be seen as a dull red glow, causing some difficulty in near-IR illumination of scenes in the dark (usually this practical problem is solved by indirect illumination). Leaves are particularly bright in the near IR, and if all visible light leaks from around an IR-filter are blocked, and the eye is given a moment to adjust to the extremely dim image coming through a visually opaque IR-passing photographic filter, it is possible to see the Wood effect that consists of IR-glowing foliage.JOURNAL, The Sensitivity of the Human Eye to Infra-Red Radiation, Journal of the Optical Society of America, 37, 7, 546â€“553, 1947, 10.1364/JOSA.37.000546, 20256359, Griffin, Donald R., Hubbard, Ruth, Wald, George, 1947JOSA...37..546G,

Telecommunication bands

In optical communications, the part of the infrared spectrum that is used is divided into seven bands based on availability of light sources, transmitting/absorbing materials (fibers), and detectors:JOURNAL, Ramaswami, Rajiv, May 2002, 10.1109/MCOM.2002.1006983, Optical Fiber Communication: From Transmission to Networking, IEEE Communications Magazine, 40, 5, 138â€“147, 29838317, {| class="wikitable"!Band!Descriptor!Wavelength range

|O band|Original|1,260â€“1,360 nm

|E band|Extended|1,360â€“1,460 nm

|S band|Short wavelength|1,460â€“1,530 nm

C band (infrared)>C band|Conventional|1,530â€“1,565 nm

|L band|Long wavelength|1,565â€“1,625 nm

|U band|Ultralong wavelength|1,625â€“1,675 nm

The C-band is the dominant band for long-distance telecommunication networks. The S and L bands are based on less well established technology, and are not as widely deployed.

Heat

File:Effect of emissivity on apparent temperature.jpg|thumb|Materials with higher emissivity emissivityInfrared radiation is popularly known as "heat radiation",BOOK, Infrared Radiation. Van Nostrand's Scientific Encyclopedia, John Wiley & Sons, Inc., 10.1002/0471743984.vse4181.pub2, Infrared Radiation, 2007, 978-0471743989, but light and electromagnetic waves of any frequency will heat surfaces that absorb them. Infrared light from the Sun accounts for 49%WEB, Introduction to Solar Energy, Passive Solar Heating & Cooling Manual, Rodale Press, Inc., 1980,weblink DOC (computing), DOC, 2007-08-12,weblink" title="web.archive.org/web/20090318200719weblink">weblink 2009-03-18, dead, of the heating of Earth, with the rest being caused by visible light that is absorbed then re-radiated at longer wavelengths. Visible light or ultraviolet-emitting lasers can char paper and incandescently hot objects emit visible radiation. Objects at room temperature will emit radiation concentrated mostly in the 8 to 25 Î¼m band, but this is not distinct from the emission of visible light by incandescent objects and ultraviolet by even hotter objects (see black body and Wien's displacement law).WEB, McCreary, Jeremy, October 30, 2004,weblink Infrared (IR) basics for digital photographers-capturing the unseen (Sidebar: Black Body Radiation), Digital Photography For What It's Worth, 2006-11-07, 2008-12-18,weblink" title="web.archive.org/web/20081218010429weblink">weblink dead, Heat is energy in transit that flows due to a temperature difference. Unlike heat transmitted by thermal conduction or thermal convection, thermal radiation can propagate through a vacuum. Thermal radiation is characterized by a particular spectrum of many wavelengths that are associated with emission from an object, due to the vibration of its molecules at a given temperature. Thermal radiation can be emitted from objects at any wavelength, and at very high temperatures such radiation is associated with spectra far above the infrared, extending into visible, ultraviolet, and even X-ray regions (e.g. the solar corona). Thus, the popular association of infrared radiation with thermal radiation is only a coincidence based on typical (comparatively low) temperatures often found near the surface of planet Earth.The concept of emissivity is important in understanding the infrared emissions of objects. This is a property of a surface that describes how its thermal emissions deviate from the ideal of a black body. To further explain, two objects at the same physical temperature may not show the same infrared image if they have differing emissivity. For example, for any pre-set emissivity value, objects with higher emissivity will appear hotter, and those with a lower emissivity will appear cooler (assuming, as is often the case, that the surrounding environment is cooler than the objects being viewed). When an object has less than perfect emissivity, it obtains properties of reflectivity and/or transparency, and so the temperature of the surrounding environment is partially reflected by and/or transmitted through the object. If the object were in a hotter environment, then a lower emissivity object at the same temperature would likely appear to be hotter than a more emissive one. For that reason, incorrect selection of emissivity and not accounting for environmental temperatures will give inaccurate results when using infrared cameras and pyrometers.

Applications

Night vision

File:Active-Infrared-Night-Vision.jpg|thumb|Active-infrared night vision: the camera illuminates the scene at infrared wavelengths invisible to the human eye human eye Infrared is used in night vision equipment when there is insufficient visible light to see.WEB, How Night Vision Works, American Technologies Network Corporation,weblink 2007-08-12, Night vision devices operate through a process involving the conversion of ambient light photons into electrons that are then amplified by a chemical and electrical process and then converted back into visible light. Infrared light sources can be used to augment the available ambient light for conversion by night vision devices, increasing in-the-dark visibility without actually using a visible light source.The use of infrared light and night vision devices should not be confused with thermal imaging, which creates images based on differences in surface temperature by detecting infrared radiation (heat) that emanates from objects and their surrounding environment.WEB, Bryant, Lynn, How does thermal imaging work? A closer look at what is behind this remarkable technology, 2007-06-11,weblink 2007-08-12,weblink" title="web.archive.org/web/20070728055934weblink">weblink 2007-07-28, dead,

Thermography

File:STS-3 infrared on reentry.jpg|thumb|left|upright=0.7|Thermography helped to determine the temperature profile of the Space Shuttle thermal protection system Space Shuttle thermal protection systemInfrared radiation can be used to remotely determine the temperature of objects (if the emissivity is known). This is termed thermography, or in the case of very hot objects in the NIR or visible it is termed pyrometry. Thermography (thermal imaging) is mainly used in military and industrial applications but the technology is reaching the public market in the form of infrared cameras on cars due to greatly reduced production costs.Thermographic cameras detect radiation in the infrared range of the electromagnetic spectrum (roughly 9,000â€“14,000 nm or 9â€“14 Î¼m) and produce images of that radiation. Since infrared radiation is emitted by all objects based on their temperatures, according to the black-body radiation law, thermography makes it possible to "see" one's environment with or without visible illumination. The amount of radiation emitted by an object increases with temperature, therefore thermography allows one to see variations in temperature (hence the name).

Hyperspectral imaging

File:Specim aisaowl outdoor.png|thumb|left| Hyperspectral thermal infrared emission measurement, an outdoor scan in winter conditions, ambient temperature âˆ’15 Â°C, image produced with a Specim LWIR hyperspectral imager. Relative radiance spectra from various targets in the image are shown with arrows. The (Infrared spectroscopy|infrared spectra]] of the different objects such as the watch clasp have clearly distinctive characteristics. The contrast level indicates the temperature of the object.Holma, H., (May 2011), Thermische Hyperspektralbildgebung im langwelligen Infrarot {{webarchive|url=https://web.archive.org/web/20110726171326weblink |date=2011-07-26 }}, Photonik)File:Blue infrared light.jpg|thumb|Infrared light from the LED of a remote control remote controlA hyperspectral image is a "picture" containing continuous spectrum through a wide spectral range at each pixel. Hyperspectral imaging is gaining importance in the field of applied spectroscopy particularly with NIR, SWIR, MWIR, and LWIR spectral regions. Typical applications include biological, mineralogical, defence, and industrial measurements.Thermal infrared hyperspectral imaging can be similarly performed using a thermographic camera, with the fundamental difference that each pixel contains a full LWIR spectrum. Consequently, chemical identification of the object can be performed without a need for an external light source such as the Sun or the Moon. Such cameras are typically applied for geological measurements, outdoor surveillance and UAV applications.Frost&Sullivan, Technical Insights, Aerospace&Defence (Feb 2011): World First Thermal Hyperspectral Camera for Unmanned Aerial Vehicles.

Other imaging

In infrared photography, infrared filters are used to capture the near-infrared spectrum. Digital cameras often use infrared blockers. Cheaper digital cameras and camera phones have less effective filters and can view intense near-infrared, appearing as a bright purple-white color. This is especially pronounced when taking pictures of subjects near IR-bright areas (such as near a lamp), where the resulting infrared interference can wash out the image. There is also a technique called 'T-ray' imaging, which is imaging using far-infrared or terahertz radiation. Lack of bright sources can make terahertz photography more challenging than most other infrared imaging techniques. Recently T-ray imaging has been of considerable interest due to a number of new developments such as terahertz time-domain spectroscopy.(File:Infrared portrait comparison.jpg|thumb|Reflected light photograph in various infrared spectra to illustrate the appearance as the wavelength of light changes.)

Tracking

Infrared tracking, also known as infrared homing, refers to a passive missile guidance system, which uses the emission from a target of electromagnetic radiation in the infrared part of the spectrum to track it. Missiles that use infrared seeking are often referred to as "heat-seekers" since infrared (IR) is just below the visible spectrum of light in frequency and is radiated strongly by hot bodies. Many objects such as people, vehicle engines, and aircraft generate and retain heat, and as such, are especially visible in the infrared wavelengths of light compared to objects in the background.JOURNAL, Mahulikar, S.P., Sonawane, H.R., Rao, G.A., 2007, Infrared signature studies of aerospace vehicles, Progress in Aerospace Sciences, 43, 7â€“8, 218â€“245,weblink 10.1016/j.paerosci.2007.06.002, 2007PrAeS..43..218M, 10.1.1.456.9135,

Heating

{{Unreferenced section|date=November 2013}}File:Hooded dryer for infrared hair drying at hair salon - shown from three perspectives.jpg|thumb|Infrared hair dryer for hair salons, c. 2010s]]Infrared radiation can be used as a deliberate heating source. For example, it is used in infrared saunas to heat the occupants. It may also be used in other heating applications, such as to remove ice from the wings of aircraft (de-icing).White, Richard P. (2000) "Infrared deicing system for aircraft" {{US Patent|6092765}} Infrared radiation is used in cooking, known as broiling or grilling. One energy advantage is that the IR energy heats only opaque objects, such as food, rather than the air around them.Infrared heating is also becoming more popular in industrial manufacturing processes, e.g. curing of coatings, forming of plastics, annealing, plastic welding, and print drying. In these applications, infrared heaters replace convection ovens and contact heating.

Cooling

A variety of technologies or proposed technologies take advantage of infrared emissions to cool buildings or other systems. The LWIR (8â€“15 Î¼m) region is especially useful since some radiation at these wavelengths can escape into space through the atmosphere's infrared window. This is how passive daytime radiative cooling (PDRC) surfaces are able to achieve sub-ambient cooling temperatures under direct solar intensity, enhancing terrestrial heat flow to outer space with zero energy consumption or pollution.JOURNAL, Chen, Meijie, Pang, Dan, Chen, Xingyu, Yan, Hongjie, Yang, Yuan, Passive daytime radiative cooling: Fundamentals, material designs, and applications, EcoMat, 2022, 4, 10.1002/eom2.12153, 240331557, Passive daytime radiative cooling (PDRC) dissipates terrestrial heat to the extremely cold outer space without using any energy input or producing pollution. It has the potential to simultaneously alleviate the two major problems of energy crisis and global warming., free, JOURNAL, Munday, Jeremy, 2019, Tackling Climate Change through Radiative Cooling, Joule, 3, 9, 2057â€“2060, 10.1016/j.joule.2019.07.010, 201590290, By covering the Earth with a small fraction of thermally emitting materials, the heat flow away from the Earth can be increased, and the net radiative flux can be reduced to zero (or even made negative), thus stabilizing (or cooling) the Earth., free, PDRC surfaces minimize shortwave solar reflectance to lessen heat gain while maintaining strong longwave infrared (LWIR) thermal radiation heat transfer.JOURNAL, Wang, Tong, Wu, Yi, Shi, Lan, Hu, Xinhua, Chen, Min, Wu, Limin, 2021, A structural polymer for highly efficient all-day passive radiative cooling, Nature Communications, 12, 365, 365, 10.1038/s41467-020-20646-7, 33446648, 7809060, Accordingly, designing and fabricating efficient PDRC with sufficiently high solar reflectance (ðœŒÂ¯solar) (Î»â€‰~â€‰0.3â€“2.5â€‰Î¼m) to minimize solar heat gain and simultaneously strong LWIR thermal emittance (ÎµÂ¯LWIR) to maximize radiative heat loss is highly desirable. When the incoming radiative heat from the Sun is balanced by the outgoing radiative heat emission, the temperature of the Earth can reach its steady state., JOURNAL, Zevenhovena, Ron, FÃ¤lt, Martin, June 2018, Radiative cooling through the atmospheric window: A third, less intrusive geoengineering approach,weblink Energy, 152, Elsevier Science Direct, When imagined on a worldwide scale, this cooling method has been proposed as a way to slow and even reverse global warming, with some estimates proposing a global surface area coverage of 1-2% to balance global heat fluxes.JOURNAL, Munday, Jeremy, 2019, Tackling Climate Change through Radiative Cooling, Joule, 3, 9, 2057â€“2060, 10.1016/j.joule.2019.07.010, 201590290, If only 1%â€“2% of the Earthâ€™s surface were instead made to radiate at this rate rather than its current average value, the total heat fluxes into and away from the entire Earth would be balanced and warming would cease., free, JOURNAL, Zevenhovena, Ron, FÃ¤lt, Martin, June 2018, Radiative cooling through the atmospheric window: A third, less intrusive geoengineering approach,weblink Energy, 152, With 100â€¯W/m2 as a demonstrated passive cooling effect, a surface coverage of 0.3% would then be needed, or 1% of Earth's land mass surface. If half of it would be installed in urban, built areas which cover roughly 3% of the Earth's land mass, a 17% coverage would be needed there, with the remainder being installed in rural areas., Elsevier Science Direct,

Communications

{{Further|Consumer IR}}IR data transmission is also employed in short-range communication among computer peripherals and personal digital assistants. These devices usually conform to standards published by IrDA, the Infrared Data Association. Remote controls and IrDA devices use infrared light-emitting diodes (LEDs) to emit infrared radiation that may be concentrated by a lens into a beam that the user aims at the detector. The beam is modulated, i.e. switched on and off, according to a code which the receiver interprets. Usually very near-IR is used (below 800 nm) for practical reasons. This wavelength is efficiently detected by inexpensive silicon photodiodes, which the receiver uses to convert the detected radiation to an electric current. That electrical signal is passed through a high-pass filter which retains the rapid pulsations due to the IR transmitter but filters out slowly changing infrared radiation from ambient light. Infrared communications are useful for indoor use in areas of high population density. IR does not penetrate walls and so does not interfere with other devices in adjoining rooms. Infrared is the most common way for remote controls to command appliances.Infrared remote control protocols like RC-5, SIRC, are used to communicate with infrared.Free space optical communication using infrared lasers can be a relatively inexpensive way to install a communications link in an urban area operating at up to 4 gigabit/s, compared to the cost of burying fiber optic cable, except for the radiation damage. "Since the eye cannot detect IR, blinking or closing the eyes to help prevent or reduce damage may not happen."Dangers of Overexposure to ultraviolet, infrared and high-energy visible light | 2013-01-03. ISHN. Retrieved on 2017-04-26.Infrared lasers are used to provide the light for optical fiber communications systems. Infrared light with a wavelength around 1,330 nm (least dispersion) or 1,550 nm (best transmission) are the best choices for standard silica fibers.IR data transmission of encoded audio versions of printed signs is being researched as an aid for visually impaired people through the RIAS (Remote Infrared Audible Signage) project.Transmitting IR data from one device to another is sometimes referred to as beaming.

Spectroscopy

Infrared vibrational spectroscopy (see also near-infrared spectroscopy) is a technique that can be used to identify molecules by analysis of their constituent bonds. Each chemical bond in a molecule vibrates at a frequency characteristic of that bond. A group of atoms in a molecule (e.g., CH2) may have multiple modes of oscillation caused by the stretching and bending motions of the group as a whole. If an oscillation leads to a change in dipole in the molecule then it will absorb a photon that has the same frequency. The vibrational frequencies of most molecules correspond to the frequencies of infrared light. Typically, the technique is used to study organic compounds using light radiation from the mid-infrared, 4,000â€“400 cmâˆ’1. A spectrum of all the frequencies of absorption in a sample is recorded. This can be used to gain information about the sample composition in terms of chemical groups present and also its purity (for example, a wet sample will show a broad O-H absorption around 3200 cmâˆ’1). The unit for expressing radiation in this application, cmâˆ’1, is the spectroscopic wavenumber. It is the frequency divided by the speed of light in vacuum.

Thin film metrology

In the semiconductor industry, infrared light can be used to characterize materials such as thin films and periodic trench structures. By measuring the reflectance of light from the surface of a semiconductor wafer, the index of refraction (n) and the extinction Coefficient (k) can be determined via the Forouhiâ€“Bloomer dispersion equations. The reflectance from the infrared light can also be used to determine the critical dimension, depth, and sidewall angle of high aspect ratio trench structures.

Meteorology

File:NOAA Shares First Infrared Imagery from GOES-17 (43904870711).gif|thumb|left|IR satellite picture of cumulonimbus clouds over the Great Plains Great Plains Weather satellites equipped with scanning radiometers produce thermal or infrared images, which can then enable a trained analyst to determine cloud heights and types, to calculate land and surface water temperatures, and to locate ocean surface features. The scanning is typically in the range 10.3â€“12.5 Î¼m (IR4 and IR5 channels).Clouds with high and cold tops, such as cyclones or cumulonimbus clouds, are often displayed as red or black, lower warmer clouds such as stratus or stratocumulus are displayed as blue or grey, with intermediate clouds shaded accordingly. Hot land surfaces are shown as dark-grey or black. One disadvantage of infrared imagery is that low cloud such as stratus or fog can have a temperature similar to the surrounding land or sea surface and does not show up. However, using the difference in brightness of the IR4 channel (10.3â€“11.5 Î¼m) and the near-infrared channel (1.58â€“1.64 Î¼m), low cloud can be distinguished, producing a fog satellite picture. The main advantage of infrared is that images can be produced at night, allowing a continuous sequence of weather to be studied.These infrared pictures can depict ocean eddies or vortices and map currents such as the Gulf Stream, which are valuable to the shipping industry. Fishermen and farmers are interested in knowing land and water temperatures to protect their crops against frost or increase their catch from the sea. Even El NiÃ±o phenomena can be spotted. Using color-digitized techniques, the gray-shaded thermal images can be converted to color for easier identification of desired information.The main water vapour channel at 6.40 to 7.08 Î¼m can be imaged by some weather satellites and shows the amount of moisture in the atmosphere.{{clear}}

Climatology

File:Greenhouse-effect-t2.svg|thumb|right|upright=1.55|The greenhouse effect greenhouse effectIn the field of climatology, atmospheric infrared radiation is monitored to detect trends in the energy exchange between the Earth and the atmosphere. These trends provide information on long-term changes in Earth's climate. It is one of the primary parameters studied in research into global warming, together with solar radiation.A pyrgeometer is utilized in this field of research to perform continuous outdoor measurements. This is a broadband infrared radiometer with sensitivity for infrared radiation between approximately 4.5 Î¼m and 50 Î¼m.

Astronomy

File:ESO - Beta Pictoris planet finally imaged (by).jpg|thumb|Beta Pictoris Beta PictorisAstronomers observe objects in the infrared portion of the electromagnetic spectrum using optical components, including mirrors, lenses and solid state digital detectors. For this reason it is classified as part of optical astronomy. To form an image, the components of an infrared telescope need to be carefully shielded from heat sources, and the detectors are chilled using liquid helium.The sensitivity of Earth-based infrared telescopes is significantly limited by water vapor in the atmosphere, which absorbs a portion of the infrared radiation arriving from space outside of selected atmospheric windows. This limitation can be partially alleviated by placing the telescope observatory at a high altitude, or by carrying the telescope aloft with a balloon or an aircraft. Space telescopes do not suffer from this handicap, and so outer space is considered the ideal location for infrared astronomy.The infrared portion of the spectrum has several useful benefits for astronomers. Cold, dark molecular clouds of gas and dust in our galaxy will glow with radiated heat as they are irradiated by imbedded stars. Infrared can also be used to detect protostars before they begin to emit visible light. Stars emit a smaller portion of their energy in the infrared spectrum, so nearby cool objects such as planets can be more readily detected. (In the visible light spectrum, the glare from the star will drown out the reflected light from a planet.)Infrared light is also useful for observing the cores of active galaxies, which are often cloaked in gas and dust. Distant galaxies with a high redshift will have the peak portion of their spectrum shifted toward longer wavelengths, so they are more readily observed in the infrared.

Cleaning

Infrared cleaning is a technique used by some motion picture film scanners, film scanners and flatbed scanners to reduce or remove the effect of dust and scratches upon the finished scan. It works by collecting an additional infrared channel from the scan at the same position and resolution as the three visible color channels (red, green, and blue). The infrared channel, in combination with the other channels, is used to detect the location of scratches and dust. Once located, those defects can be corrected by scaling or replaced by inpainting.weblink" title="web.archive.org/web/20110107163528weblink">Digital ICE. kodak.com

Art conservation and analysis

File:Infrared reflectograms of Mona Lisa.jpg|thumb|left|upright=0.8|An infrared reflectogram of Mona Lisa by Leonardo da Vinci Leonardo da Vinci(File:Infrared reflectography-en.svg|frameless|right|upright=0.9)Infrared reflectographyWEB,weblink IR Reflectography for Non-destructive Analysis of Underdrawings in Art Objects, Sensors Unlimited, Inc., 2009-02-20, 2008-12-08,weblink" title="web.archive.org/web/20081208052302weblink">weblink dead, can be applied to paintings to reveal underlying layers in a non-destructive manner, in particular the artist's underdrawing or outline drawn as a guide. Art conservators use the technique to examine how the visible layers of paint differ from the underdrawing or layers in between (such alterations are called pentimenti when made by the original artist). This is very useful information in deciding whether a painting is the prime version by the original artist or a copy, and whether it has been altered by over-enthusiastic restoration work. In general, the more pentimenti, the more likely a painting is to be the prime version. It also gives useful insights into working practices.WEB,weblink The Mass of Saint Gregory: Examining a Painting Using Infrared Reflectography, The Cleveland Museum of Art, 2009-02-20,weblink" title="web.archive.org/web/20090113225836weblink">weblink 2009-01-13, dead, Reflectography often reveals the artist's use of carbon black, which shows up well in reflectograms, as long as it has not also been used in the ground underlying the whole painting.Recent progress in the design of infrared-sensitive cameras makes it possible to discover and depict not only underpaintings and pentimenti, but entire paintings that were later overpainted by the artist.Infrared reflectography in analysis of paintings at ColourLex. Notable examples are Picasso's Woman Ironing and Blue Room, where in both cases a portrait of a man has been made visible under the painting as it is known today.Similar uses of infrared are made by conservators and scientists on various types of objects, especially very old written documents such as the Dead Sea Scrolls, the Roman works in the Villa of the Papyri, and the Silk Road texts found in the Dunhuang Caves.WEB,weblink International Dunhuang Project An Introduction to digital infrared photography and its application within IDP, Idp.bl.uk, 2011-11-08, 2008-12-02,weblink" title="web.archive.org/web/20081202000830weblink">weblink dead, Carbon black used in ink can show up extremely well.

Biological systems

{{further|Infrared sensing in snakes}}(File:wiki snake eats mouse.jpg|thumb|Thermographic image of a snake eating a mouse)The pit viper has a pair of infrared sensory pits on its head. There is uncertainty regarding the exact thermal sensitivity of this biological infrared detection system.JOURNAL, Thermal Modeling of Snake Infrared Reception: Evidence for Limited Detection Range, Journal of Theoretical Biology, 209, 2, 201â€“211, 2001, 10.1006/jtbi.2000.2256, 11401462, Jones, B.S., Lynn, W.F., Stone, M.O., 2001JThBi.209..201J,weblink JOURNAL, Biological Thermal Detection: Micromechanical and Microthermal Properties of Biological Infrared Receptors, Biomacromolecules, 3, 1, 106â€“115, 2002, 10.1021/bm015591f, 11866562, Gorbunov, V., Fuchigami, N., Stone, M., Grace, M., Tsukruk, V. V., 21737304, Other organisms that have thermoreceptive organs are pythons (family Pythonidae), some boas (family Boidae), the Common Vampire Bat (Desmodus rotundus), a variety of jewel beetles (Melanophila acuminata),JOURNAL, Evans, W.G., Infrared receptors in Melanophila acuminata De Geer, Nature, 202, 211, 1966, 10.1038/202211a0, 14156319, 1964Natur.202..211E, 4928, 2553265, free, darkly pigmented butterflies (Pachliopta aristolochiae and Troides rhadamantus plateni), and possibly blood-sucking bugs (Triatoma infestans).JOURNAL, Biological infrared imaging and sensing, Micrometre, 2002, 33, 2, 211â€“225, 10.1016/S0968-4328(01)00010-5, 11567889, Campbell, Angela L., Naik, Rajesh R., Sowards, Laura, Stone, Morley O.,weblink Some fungi like Venturia inaequalis require near-infrared light for ejection.JOURNAL, Brook, P. J., 26 April 1969, Stimulation of Ascospore Release in Venturia inaequalis by Far Red Light, Nature, En, 222, 5191, 390â€“392, 10.1038/222390a0, 0028-0836, 1969Natur.222..390B, 4293713, Although near-infrared vision (780â€“1,000 nm) has long been deemed impossible due to noise in visual pigments,JOURNAL, Visual prey detection by near-infrared cues in a fish, Naturwissenschaften, 2012, 10.1007/s00114-012-0980-7, Meuthen, Denis, Rick, Ingolf P., ThÃ¼nken, Timo, Baldauf, Sebastian A., 99, 12, 1063â€“6, 23086394, 2012NW.....99.1063M, 4512517, sensation of near-infrared light was reported in the common carp and in three cichlid species.JOURNAL, Postural control in tilapia under microgravity and the near infrared irradiated conditions, Endo, M., Kobayashi R., Ariga, K., Yoshizaki, G., Takeuchi, T., Nippon Suisan Gakkaishi, 68, 887â€“892, 2002, 10.2331/suisan.68.887, 6, free, JOURNAL, Sensitivity of tilapia to infrared light measured using a rotating striped drum differs between two strains, Kobayashi R., Endo, M., Yoshizaki, G., Takeuchi, T., Nippon Suisan Gakkaishi, 68, 646â€“651, 2002, 10.2331/suisan.68.646, 5, free, JOURNAL, The eyes of the common carp and Nile tilapia are sensitive to near-infrared, 10.1111/j.1444-2906.2005.00971.x, Fisheries Science, 71, 350â€“355, 2005, Matsumoto, Taro, Kawamura, Gunzo, 2, 24556470, JOURNAL, Near-infrared orientation of Mozambique tilapia Oreochromis mossambicus, Zoology, 115, 233â€“238, 2012, 10.1016/j.zool.2012.01.005, Shcherbakov, Denis, KnÃ¶rzer, Alexandra, Hilbig, Reinhard, Haas, Ulrich, Blum, Martin, 4, 22770589, Fish use NIR to capture prey and for phototactic swimming orientation. NIR sensation in fish may be relevant under poor lighting conditions during twilight and in turbid surface waters.

Photobiomodulation

Near-infrared light, or photobiomodulation, is used for treatment of chemotherapy-induced oral ulceration as well as wound healing. There is some work relating to anti-herpes virus treatment.JOURNAL, Hargate, G, A randomised double-blind study comparing the effect of 1072-nm light against placebo for the treatment of herpes labialis, Clinical and Experimental Dermatology, 31, 5, 638â€“41, 2006, 16780494, 10.1111/j.1365-2230.2006.02191.x, 26977101, Research projects include work on central nervous system healing effects via cytochrome c oxidase upregulation and other possible mechanisms.JOURNAL, Desmet KD, Paz DA, Corry JJ, Eells JT, Wong-Riley MT, Henry MM, Buchmann EV, Connelly MP, Dovi JV, Liang HL, Henshel DS, Yeager RL, Millsap DS, Lim J, Gould LJ, Das R, Jett M, Hodgson BD, Margolis D, Whelan HT, May 2006, Clinical and experimental applications of NIR-LED photobiomodulation, Photomedicine and Laser Surgery, 24, 2, 121â€“8, 16706690, 10.1089/pho.2006.24.121, 22442409,weblink

Health hazards

Strong infrared radiation in certain industry high-heat settings may be hazardous to the eyes, resulting in damage or blindness to the user. Since the radiation is invisible, special IR-proof goggles must be worn in such places.BOOK, Rosso, Monona l, The Artist's Complete Health and Safety Guide,weblink 2001, Allworth Press, 978-1-58115-204-3, 33â€“,

Scientific history

The discovery of infrared radiation is ascribed to William Herschel, the astronomer, in the early 19th century. Herschel published his results in 1800 before the Royal Society of London. Herschel used a prism to refract light from the sun and detected the infrared, beyond the red part of the spectrum, through an increase in the temperature recorded on a thermometer. He was surprised at the result and called them "Calorific Rays".JOURNAL, Herschel, William, Experiments on the refrangibility of the invisible rays of the Sun, Philosophical Transactions of the Royal Society of London, 1800, 90, 284â€“292,weblink 107057, 10.1098/rstl.1800.0015, free, WEB,weblink Herschel Discovers Infrared Light, Coolcosmos.ipac.caltech.edu, 2011-11-08, dead,weblink" title="web.archive.org/web/20120225094516weblink">weblink 2012-02-25, The term "infrared" did not appear until late 19th century.In 1867, French physicist Edmond Becquerel coined the term (infra-red):

BOOK, Becquerel, Edmond, La Lumiere: Ses causes et ses effets, Light: Its causes and effects, 1867, Didot FrÃ¨res, Fils et Cie., Paris, France, 141â€“145,weblink fr,

The word was translated into English as "infrared" in 1874, in a translation of an article by Vignaud Dupuy de Saint-Florent (1830â€“1907), an engineer in the French army, who attained the rank of lieutenant colonel and who pursued photography as a pastime.

JOURNAL, de Saint-Florent, Photography in natural colours, The Photographic News, 10 April 1874, 18, 175â€“176,weblink From p. 176: "As to the infra-red rays, they may be absorbed by means of a weak solution of sulphate of copper, ..."

Notes

References

External links

{{Sister project links|wikt=infrared|commons=Category:Infrared|q=no}}

Infrared: A Historical Perspective (Omega Engineering)
Infrared Data Association, a standards organization for infrared data interconnection
SIRC Protocol
How to build a USB infrared receiver to control PC's remotely
weblink" title="web.archive.org/web/20060114051647weblink">Infrared Waves: detailed explanation of infrared light. (NASA)
Herschel's original paper from 1800 announcing the discovery of infrared light
The thermographic's library, collection of thermogram
Infrared reflectography in analysis of paintings at ColourLex
Molly Faries, Techniques and Applications â€“ Analytical Capabilities of Infrared Reflectography: An Art Historian s Perspective, in Scientific Examination of Art: Modern Techniques in Conservation and Analysis, Sackler NAS Colloquium, 2005

- content above as imported from Wikipedia
- "Infrared" does not exist on GetWiki (yet)
- time: 8:37am EDT - Sat, May 18 2024

[ this remote article is provided by Wikipedia ]

CONNECT

GetWiki

Infrared

Definition and relationship to the electromagnetic spectrum

Nature

Regions

Visible limit

Commonly used subdivision scheme

CIE division scheme

ISO 20473 scheme

Astronomy division scheme

Sensor response division scheme

Telecommunication bands

Heat

Applications

Night vision

Thermography

Hyperspectral imaging

Other imaging

Tracking

Heating

Cooling

Communications

Spectroscopy

Thin film metrology

Meteorology

Climatology

Astronomy

Cleaning

Art conservation and analysis

Biological systems

Photobiomodulation

Health hazards

Scientific history

See also

Notes

References

External links