GetWiki

{{Short description|Portion of a disk enclosed by two radii and an arc}}{{Distinguish|circular section}}thumb|300px|The minor sector is shaded in green while the major sector is shaded white.A circular sector, also known as circle sector or disk sector or simply a sector (symbol: ⌔), is the portion of a disk (a closed region bounded by a circle) enclosed by two radii and an arc, with the smaller area being known as the minor sector and the larger being the major sector.BOOK, Dewan, Rajesh K., Saraswati Mathematics, New Saraswati House India Pvt Ltd, 978-8173358371, New Delhi, 2016, 234,books.google.com/books?id=WT0_DAAAQBAJ&pg=PA234, In the diagram, {{mvar|θ}} is the central angle, r the radius of the circle, and L is the arc length of the minor sector.The angle formed by connecting the endpoints of the arc to any point on the circumference that is not in the sector is equal to half the central angle.BOOK, Achatz, Thomas, Anderson, John G., John G. Anderson,www.worldcat.org/oclc/56559272, Technical shop mathematics, 2005, Industrial Press, Kathleen McKenzie, 978-0831130862, 3rd, New York, 56559272, 376,

Types

A sector with the central angle of 180° is called a half-disk and is bounded by a diameter and a semicircle. Sectors with other central angles are sometimes given special names, such as quadrants (90°), sextants (60°), and octants (45°), which come from the sector being one 4th, 6th or 8th part of a full circle, respectively. Confusingly, the arc of a quadrant (a circular arc) can also be termed a quadrant.

Compass

File:Windrose.svg|thumb|right|150px|An 8-point windrose ]]Traditionally wind directions on the compass rose are given as one of the 8 octants (N, NE, E, SE, S, SW, W, NW) because that is more precise than merely giving one of the 4 quadrants, and the wind vane typically does not have enough accuracy to allow more precise indication.The name of the instrument “octant” comes from the fact that it is based on 1/8th of the circle.Most commonly, octants are seen on the compass rose.

Area

{{see also|Circular arc#Sector area}}The total area of a circle is {{math|Ï€r{{isup|2}}}}. The area of the sector can be obtained by multiplying the circle’s area by the ratio of the angle θ (expressed in radians) and {{math|2Ï€}} (because the area of the sector is directly proportional to its angle, and {{math|2Ï€}} is the angle for the whole circle, in radians):A = pi r^2, frac{theta}{2 pi} = frac{r^2 theta}{2}The area of a sector in terms of L can be obtained by multiplying the total area {{pi}}r{{isup|2}} by the ratio of L to the total perimeter 2{{pi}}r.A = pi r^2, frac{L}{2pi r} = frac{rL}{2}Another approach is to consider this area as the result of the following integral:A = int_0^thetaint_0^r dS = int_0^thetaint_0^r tilde{r}, dtilde{r}, dtilde{theta} = int_0^theta frac 1 2 r^2, dtilde{theta} = frac{r^2 theta}{2}Converting the central angle into degrees givesBOOK, Uppal, Shveta, Mathematics: Textbook for class X, 2019, National Council of Educational Research and Training, 978-81-7450-634-4, New Delhi, 226, 227, 1145113954, A = pi r^2 frac{theta^circ}{360^circ}

Perimeter

The length of the perimeter of a sector is the sum of the arc length and the two radii:P = L + 2r = theta r + 2r = r (theta + 2)where {{mvar|θ}} is in radians.

Arc length

The formula for the length of an arc is:BOOK, Larson, Ron, Ron Larson, Bruce H., Edwards,www.worldcat.org/oclc/706621772, Calculus I with Precalculus, 2002, 978-0-8400-6833-0, 3rd, Boston, MA., 706621772, Cengage, Brooks/Cole, 570, where {{mvar|L}} represents the arc length, r represents the radius of the circle and θ represents the angle in radians made by the arc at the centre of the circle.BOOK, Wicks, Alan,www.worldcat.org/oclc/58869667, Mathematics Standard Level for the International Baccalaureate : a text for the new syllabus, 2004, Infinity Publishing.com, 0-7414-2141-0, West Conshohocken, Pennsylvania, West Conshohocken, PA, 58869667, 79, If the value of angle is given in degrees, then we can also use the following formula by:L = 2 pi r frac{theta}{360}

Chord length

The length of a chord formed with the extremal points of the arc is given byC = 2Rsinfrac{theta}{2}where {{mvar|C}} represents the chord length, {{mvar|R}} represents the radius of the circle, and {{mvar|θ}} represents the angular width of the sector in radians.

See also

• Circular segment – the part of the sector which remains after removing the triangle formed by the center of the circle and the two endpoints of the circular arc on the boundary.
• Conic section
• Earth quadrant
• Sector of (mathematics)
• Spherical sector – the analogous 3D figure

References

{{Reflist}}

Sources

• Gerard, L. J. V., The Elements of Geometry, in Eight Books; or, First Step in Applied Logic (London, Longmans, Green, Reader and Dyer, 1874), p. 285.
• Legendre, A. M., Elements of Geometry and Trigonometry, Charles Davies, ed. (New York: A. S. Barnes & Co., 1858), p. 119.