chemical reaction

aesthetics  →
being  →
complexity  →
database  →
enterprise  →
ethics  →
fiction  →
history  →
internet  →
knowledge  →
language  →
licensing  →
linux  →
logic  →
method  →
news  →
perception  →
philosophy  →
policy  →
purpose  →
religion  →
science  →
sociology  →
software  →
truth  →
unix  →
wiki  →
essay  →
feed  →
help  →
system  →
wiki  →
critical  →
discussion  →
forked  →
imported  →
original  →
chemical reaction
[ temporary import ]
please note:
- the content below is remote from Wikipedia
- it has been imported raw for GetWiki
{{short description|Process that results in the interconversion of chemical species}}{{pp|small=yes}}File:ThermiteReaction.jpg|thumb|A thermitethermiteA chemical reaction is a process that leads to the chemical transformation of one set of chemical substances to another.{{GoldBookRef|title=chemical reaction|file=C01033}} Classically, chemical reactions encompass changes that only involve the positions of electrons in the forming and breaking of chemical bonds between atoms, with no change to the nuclei (no change to the elements present), and can often be described by a chemical equation. Nuclear chemistry is a sub-discipline of chemistry that involves the chemical reactions of unstable and radioactive elements where both electronic and nuclear changes can occur.The substance (or substances) initially involved in a chemical reaction are called reactants or reagents. Chemical reactions are usually characterized by a chemical change, and they yield one or more products, which usually have properties different from the reactants. Reactions often consist of a sequence of individual sub-steps, the so-called elementary reactions, and the information on the precise course of action is part of the reaction mechanism. Chemical reactions are described with chemical equations, which symbolically present the starting materials, end products, and sometimes intermediate products and reaction conditions.Chemical reactions happen at a characteristic reaction rate at a given temperature and chemical concentration. Typically, reaction rates increase with increasing temperature because there is more thermal energy available to reach the activation energy necessary for breaking bonds between atoms.Reactions may proceed in the forward or reverse direction until they go to completion or reach equilibrium. Reactions that proceed in the forward direction to approach equilibrium are often described as spontaneous, requiring no input of free energy to go forward. Non-spontaneous reactions require input of free energy to go forward (examples include charging a battery by applying an external electrical power source, or photosynthesis driven by absorption of electromagnetic radiation in the form of sunlight).Different chemical reactions are used in combinations during chemical synthesis in order to obtain a desired product. In biochemistry, a consecutive series of chemical reactions (where the product of one reaction is the reactant of the next reaction) form metabolic pathways. These reactions are often catalyzed by protein enzymes. Enzymes increase the rates of biochemical reactions, so that metabolic syntheses and decompositions impossible under ordinary conditions can occur at the temperatures and concentrations present within a cell.The general concept of a chemical reaction has been extended to reactions between entities smaller than atoms, including nuclear reactions, radioactive decays, and reactions between elementary particles, as described by quantum field theory.


File:Antoine lavoisier color.jpg|thumb|Antoine LavoisierAntoine LavoisierChemical reactions such as combustion in fire, fermentation and the reduction of ores to metals were known since antiquity. Initial theories of transformation of materials were developed by Greek philosophers, such as the Four-Element Theory of Empedocles stating that any substance is composed of the four basic elements – fire, water, air and earth. In the Middle Ages, chemical transformations were studied by Alchemists. They attempted, in particular, to convert lead into gold, for which purpose they used reactions of lead and lead-copper alloys with sulfur.JOURNAL, 10.1002/ciuz.19730070604, Neuere Interpretationsmöglichkeiten der Alchemie, Chemie in Unserer Zeit, 7, 6, 177–181, 1973, Weyer, J., The production of chemical substances that do not normally occur in nature has long been tried, such as the synthesis of sulfuric and nitric acids attributed to the controversial alchemist Jābir ibn Hayyān. The process involved heating of sulfate and nitrate minerals such as copper sulfate, alum and saltpeter. In the 17th century, Johann Rudolph Glauber produced hydrochloric acid and sodium sulfate by reacting sulfuric acid and sodium chloride. With the development of the lead chamber process in 1746 and the Leblanc process, allowing large-scale production of sulfuric acid and sodium carbonate, respectively, chemical reactions became implemented into the industry. Further optimization of sulfuric acid technology resulted in the contact process in the 1880s,BOOK, Friedman, Leonard J., Friedman, Samantha J.,weblink The History of the Contact Sulfuric Acid Process, 2008, Acid Engineering & Consulting, Inc., Boca Raton, Florida, and the Haber process was developed in 1909–1910 for ammonia synthesis.ENCYCLOPEDIA, Lesch, John E.,weblink The German Chemical Industry in the Twentieth Century, Stranges, Anthony N., Germany's synthetic fuel industry, 1935–1940, Kluwer Academic Publishers, 2000, 978-0-7923-6487-0, 170, From the 16th century, researchers including Jan Baptist van Helmont, Robert Boyle, and Isaac Newton tried to establish theories of the experimentally observed chemical transformations. The phlogiston theory was proposed in 1667 by Johann Joachim Becher. It postulated the existence of a fire-like element called "phlogiston", which was contained within combustible bodies and released during combustion. This proved to be false in 1785 by Antoine Lavoisier who found the correct explanation of the combustion as reaction with oxygen from the air.Brock, pp. 34–55Joseph Louis Gay-Lussac recognized in 1808 that gases always react in a certain relationship with each other. Based on this idea and the atomic theory of John Dalton, Joseph Proust had developed the law of definite proportions, which later resulted in the concepts of stoichiometry and chemical equations.Brock, pp. 104–107Regarding the organic chemistry, it was long believed that compounds obtained from living organisms were too complex to be obtained synthetically. According to the concept of vitalism, organic matter was endowed with a "vital force" and distinguished from inorganic materials. This separation was ended however by the synthesis of urea from inorganic precursors by Friedrich Wöhler in 1828. Other chemists who brought major contributions to organic chemistry include Alexander William Williamson with his synthesis of ethers and Christopher Kelk Ingold, who, among many discoveries, established the mechanisms of substitution reactions.


File:Combustion reaction of methane.jpg|thumb|450px|As seen from the equation {{chem|CH|4}} + 2 {{chem|O|2}} → {{chem|CO|2}} + 2 {{chem|H|2|O}}, a coefficient of 2 must be placed before the oxygen gas on the reactants side and before the water on the products side in order for, as per the law of conservation of mass, the quantity of each element does not change during the reaction]]Chemical equations are used to graphically illustrate chemical reactions. They consist of chemical or structural formulas of the reactants on the left and those of the products on the right. They are separated by an arrow (→) which indicates the direction and type of the reaction; the arrow is read as the word "yields".BOOK, Myers, Richard, The Basics of Chemistry, 2009,weblink Greenwood Publishing Group, 978-0-313-31664-7, 55, The tip of the arrow points in the direction in which the reaction proceeds. A double arrow ({{eqm}}) pointing in opposite directions is used for equilibrium reactions. Equations should be balanced according to the stoichiometry, the number of atoms of each species should be the same on both sides of the equation. This is achieved by scaling the number of involved molecules (A, B, C and D in a schematic example below) by the appropriate integers a, b, c and d.{{GoldBookRef|title=chemical reaction equation|file=C01034}}
mathit a A{} + mathit b B -> mathit c C{} + mathit d D
More elaborate reactions are represented by reaction schemes, which in addition to starting materials and products show important intermediates or transition states. Also, some relatively minor additions to the reaction can be indicated above the reaction arrow; examples of such additions are water, heat, illumination, a catalyst, etc. Similarly, some minor products can be placed below the arrow, often with a minus sign.File:Baeyer-Villiger-Oxidation-V1.svg|thumb|center|750px|An example of organic reaction: oxidation of ketones to esters with a peroxycarboxylic acid ]]{{clear}}Retrosynthetic analysis can be applied to design a complex synthesis reaction. Here the analysis starts from the products, for example by splitting selected chemical bonds, to arrive at plausible initial reagents. A special arrow (⇒) is used in retro reactions.JOURNAL, 10.1039/CS9881700111, Robert Robinson Lecture. Retrosynthetic thinking?essentials and examples, Chemical Society Reviews, 17, 111–133, 1988, Corey, E.J.,

Elementary reactions

The elementary reaction is the smallest division into which a chemical reaction can be decomposed, it has no intermediate products.{{GoldBookRef|title=elementary reaction|file=E02035}} Most experimentally observed reactions are built up from many elementary reactions that occur in parallel or sequentially. The actual sequence of the individual elementary reactions is known as reaction mechanism. An elementary reaction involves a few molecules, usually one or two, because of the low probability for several molecules to meet at a certain time.ENCYCLOPEDIA, Frenking, Gernot, Elementarreaktionen, Römpp Chemie-Lexikon, Thieme Medical Publishers, Thieme, 2006, File:Azobenzene isomerization de.svg|thumb|300px|Isomerization of azobenzeneazobenzeneThe most important elementary reactions are unimolecular and bimolecular reactions. Only one molecule is involved in a unimolecular reaction; it is transformed by an isomerization or a dissociation into one or more other molecules. Such reactions require the addition of energy in the form of heat or light. A typical example of a unimolecular reaction is the cis–trans isomerization, in which the cis-form of a compound converts to the trans-form or vice versa.In a typical dissociation reaction, a bond in a molecule splits (ruptures) resulting in two molecular fragments. The splitting can be homolytic or heterolytic. In the first case, the bond is divided so that each product retains an electron and becomes a neutral radical. In the second case, both electrons of the chemical bond remain with one of the products, resulting in charged ions. Dissociation plays an important role in triggering chain reactions, such as hydrogen–oxygen or polymerization reactions.
AB -> A + B Dissociation of a molecule AB into fragments A and B
For bimolecular reactions, two molecules collide and react with each other. Their merger is called chemical synthesis or an addition reaction.
A + B -> AB
Another possibility is that only a portion of one molecule is transferred to the other molecule. This type of reaction occurs, for example, in redox and acid-base reactions. In redox reactions, the transferred particle is an electron, whereas in acid-base reactions it is a proton. This type of reaction is also called metathesis.
HA + B -> A + HB
for example
NaCl + AgNO3 -> NaNO3 + AgCl(v)

Chemical equilibrium

Most chemical reactions are reversible, that is they can and do run in both directions. The forward and reverse reactions are competing with each other and differ in reaction rates. These rates depend on the concentration and therefore change with time of the reaction: the reverse rate gradually increases and becomes equal to the rate of the forward reaction, establishing the so-called chemical equilibrium. The time to reach equilibrium depends on such parameters as temperature, pressure and the materials involved, and is determined by the minimum free energy. In equilibrium, the Gibbs free energy must be zero. The pressure dependence can be explained with the Le Chatelier's principle. For example, an increase in pressure due to decreasing volume causes the reaction to shift to the side with the fewer moles of gas.Atkins, p. 114.The reaction yield stabilizes at equilibrium, but can be increased by removing the product from the reaction mixture or changed by increasing the temperature or pressure. A change in the concentrations of the reactants does not affect the equilibrium constant, but does affect the equilibrium position.


Chemical reactions are determined by the laws of thermodynamics. Reactions can proceed by themselves if they are exergonic, that is if they release energy. The associated free energy of the reaction is composed of two different thermodynamic quantities, enthalpy and entropy:Atkins, pp. 106–108
; Delta G = Delta H - T cdot Delta S. {{mvar|G}}: free energy, {{mvar|H}}: enthalpy, {{mvar|T}}: temperature, {{mvar|S}}: entropy, {{math|Δ}}: difference(change between original and product)
Reactions can be exothermic, where ΔH is negative and energy is released. Typical examples of exothermic reactions are precipitation and crystallization, in which ordered solids are formed from disordered gaseous or liquid phases. In contrast, in endothermic reactions, heat is consumed from the environment. This can occur by increasing the entropy of the system, often through the formation of gaseous reaction products, which have high entropy. Since the entropy increases with temperature, many endothermic reactions preferably take place at high temperatures. On the contrary, many exothermic reactions such as crystallization occur at low temperatures. Changes in temperature can sometimes reverse the sign of the enthalpy of a reaction, as for the carbon monoxide reduction of molybdenum dioxide:
2CO(g) + MoO2(s) -> 2CO2(g) + Mo(s); Delta H^o = +21.86 text{kJ at 298 K}
This reaction to form carbon dioxide and molybdenum is endothermic at low temperatures, becoming less so with increasing temperature.Reaction Web ΔH° is zero at {{val|1855|ul=K}}, and the reaction becomes exothermic above that temperature.Changes in temperature can also reverse the direction tendency of a reaction. For example, the water gas shift reaction
CO(g) + H2O({v}) CO2(g) + H2(g)
is favored by low temperatures, but its reverse is favored by high temperature. The shift in reaction direction tendency occurs at {{val|1100|u=K}}.Reactions can also be characterized by the internal energy which takes into account changes in the entropy, volume and chemical potential. The latter depends, among other things, on the activities of the involved substances.Atkins, p. 150
; {d}U = Tcdot {d}S - pcdot {d}V + mucdot {d}n {{mvar|U}}: internal energy, {{mvar|S}}: entropy, {{mvar|p}}: pressure, {{mvar|μ}}: chemical potential, {{mvar|n}}: number of molecules, {{mvar|d}}: small change sign


The speed at which reactions takes place is studied by reaction kinetics. The rate depends on various parameters, such as:
  • Reactant concentrations, which usually make the reaction happen at a faster rate if raised through increased collisions per unit time. Some reactions, however, have rates that are independent of reactant concentrations. These are called zero order reactions.
  • Surface area available for contact between the reactants, in particular solid ones in heterogeneous systems. Larger surface areas lead to higher reaction rates.
  • Pressure – increasing the pressure decreases the volume between molecules and therefore increases the frequency of collisions between the molecules.
  • Activation energy, which is defined as the amount of energy required to make the reaction start and carry on spontaneously. Higher activation energy implies that the reactants need more energy to start than a reaction with a lower activation energy.
  • Temperature, which hastens reactions if raised, since higher temperature increases the energy of the molecules, creating more collisions per unit time,
  • The presence or absence of a catalyst. Catalysts are substances which change the pathway (mechanism) of a reaction which in turn increases the speed of a reaction by lowering the activation energy needed for the reaction to take place. A catalyst is not destroyed or changed during a reaction, so it can be used again.
  • For some reactions, the presence of electromagnetic radiation, most notably ultraviolet light, is needed to promote the breaking of bonds to start the reaction. This is particularly true for reactions involving radicals.
Several theories allow calculating the reaction rates at the molecular level. This field is referred to as reaction dynamics. The rate v of a first-order reaction, which could be disintegration of a substance A, is given by:
v= -frac {d[ce{A}]}{dt}= k cdot [ce{A}].
Its integration yields:
ce{[A]}(t) = ce{[A]}_{0} cdot e^{-kcdot t}.
Here k is first-order rate constant having dimension 1/time, [A](t) is concentration at a time t and [A]0 is the initial concentration. The rate of a first-order reaction depends only on the concentration and the properties of the involved substance, and the reaction itself can be described with the characteristic half-life. More than one time constant is needed when describing reactions of higher order. The temperature dependence of the rate constant usually follows the Arrhenius equation:
k = k_0 e^{{-E_a}/{k_{B}T}}
where Ea is the activation energy and kB is the Boltzmann constant. One of the simplest models of reaction rate is the collision theory. More realistic models are tailored to a specific problem and include the transition state theory, the calculation of the potential energy surface, the Marcus theory and the Rice–Ramsperger–Kassel–Marcus (RRKM) theory.Atkins, p. 963

Reaction types

Four basic types

(File:Chemical reactions.svg|thumb|500px|Representation of four basic chemical reactions types: synthesis, decomposition, single replacement and double replacement.)


In a synthesis reaction, two or more simple substances combine to form a more complex substance. These reactions are in the general form:
A + B -> AB
Two or more reactants yielding one product is another way to identify a synthesis reaction. One example of a synthesis reaction is the combination of iron and sulfur to form iron(II) sulfide:
8Fe + S8 -> 8FeS
Another example is simple hydrogen gas combined with simple oxygen gas to produce a more complex substance, such as water.To react or not to react? {{Webarchive|url= |date=2015-01-10 }} Utah State Office of Education. Retrieved 4 June 2011.


A decomposition reaction is when a more complex substance breaks down into its more simple parts. It is thus the opposite of a synthesis reaction, and can be written asThe six types of reaction – The Cavalcade o' Chemistry. Retrieved 11 February 2016
AB -> A + B
One example of a decomposition reaction is the electrolysis of water to make oxygen and hydrogen gas:
2H2O -> 2H2 + O2

Single replacement

In a single replacement reaction, a single uncombined element replaces another in a compound; in other words, one element trades places with another element in a compound These reactions come in the general form of:
A + BC -> AC + B
One example of a single displacement reaction is when magnesium replaces hydrogen in water to make magnesium hydroxide and hydrogen gas:
Mg + 2H2O -> Mg(OH)2 + H2 (^)

Double replacement

In a double replacement reaction, the anions and cations of two compounds switch places and form two entirely different compounds. These reactions are in the general form:
AB + CD -> AD + CB
For example, when barium chloride (BaCl2) and magnesium sulfate (MgSO4) react, the SO42− anion switches places with the 2Cl− anion, giving the compounds BaSO4 and MgCl2.Another example of a double displacement reaction is the reaction of lead(II) nitrate with potassium iodide to form lead(II) iodide and potassium nitrate:
Pb(NO3)2 + 2KI -> PbI2(v) + 2KNO3

Oxidation and reduction

(File:redox reaction.png|thumb|right|250px|Illustration of a redox reaction)File:Common-salt.jpg|thumb|right|250px|Sodium chlorideSodium chlorideRedox reactions can be understood in terms of transfer of electrons from one involved species (reducing agent) to another (oxidizing agent). In this process, the former species is oxidized and the latter is reduced. Though sufficient for many purposes, these descriptions are not precisely correct. Oxidation is better defined as an increase in oxidation state, and reduction as a decrease in oxidation state. In practice, the transfer of electrons will always change the oxidation state, but there are many reactions that are classed as "redox" even though no electron transfer occurs (such as those involving covalent bonds).ENCYCLOPEDIA, Glusker, Jenny P., Jenny Glusker, Structural Aspects of Metal Liganding to Functional Groups in Proteins, Christian B. Anfinsen,weblink Advances in Protein Chemistry, 42, Academic Press, San Diego, 1991, 978-0-12-034242-6, 7, In the following redox reaction, hazardous sodium metal reacts with toxic chlorine gas to form the ionic compound sodium chloride, or common table salt:
2Na(s) + Cl2(g) -> 2NaCl(s)
In the reaction, sodium metal goes from an oxidation state of 0 (as it is a pure element) to +1: in other words, the sodium lost one electron and is said to have been oxidized. On the other hand, the chlorine gas goes from an oxidation of 0 (it is also a pure element) to −1: the chlorine gains one electron and is said to have been reduced. Because the chlorine is the one reduced, it is considered the electron acceptor, or in other words, induces oxidation in the sodium – thus the chlorine gas is considered the oxidizing agent. Conversely, the sodium is oxidized or is the electron donor, and thus induces reduction in the other species and is considered the reducing agent.Which of the involved reactants would be reducing or oxidizing agent can be predicted from the electronegativity of their elements. Elements with low electronegativity, such as most metals, easily donate electrons and oxidize – they are reducing agents. On the contrary, many ions with high oxidation numbers, such as {{chem|link=hydrogen peroxide|H|2|O|2}}, {{chem|link=permanganate|MnO|4|-}}, {{chem|link=chromium trioxide|CrO|3}}, {{chem|link=dichromate|Cr|2|O|7|2-}}, {{chem|link=Osmium(VIII) oxide|OsO|4}} can gain one or two extra electrons and are strong oxidizing agents.The number of electrons donated or accepted in a redox reaction can be predicted from the electron configuration of the reactant element. Elements try to reach the low-energy noble gas configuration, and therefore alkali metals and halogens will donate and accept one electron respectively. Noble gases themselves are chemically inactive.Wiberg, pp. 289–290An important class of redox reactions are the electrochemical reactions, where electrons from the power supply are used as the reducing agent. These reactions are particularly important for the production of chemical elements, such as chlorineWiberg, p. 409 or aluminium. The reverse process in which electrons are released in redox reactions and can be used as electrical energy is possible and used in batteries.


File:Ferrocene-from-xtal-3D-balls.png|160px|thumb|Ferrocene – an iron atom sandwiched between two C5H5 ligandligandIn complexation reactions, several ligands react with a metal atom to form a coordination complex. This is achieved by providing lone pairs of the ligand into empty orbitals of the metal atom and forming dipolar bonds. The ligands are Lewis bases, they can be both ions and neutral molecules, such as carbon monoxide, ammonia or water. The number of ligands that react with a central metal atom can be found using the 18-electron rule, saying that the valence shells of a transition metal will collectively accommodate 18 electrons, whereas the symmetry of the resulting complex can be predicted with the crystal field theory and ligand field theory. Complexation reactions also include ligand exchange, in which one or more ligands are replaced by another, and redox processes which change the oxidation state of the central metal atom.Wiberg, pp. 1180–1205

Acid-base reactions

In the Brønsted–Lowry acid–base theory, an acid-base reaction involves a transfer of protons (H+) from one species (the acid) to another (the base). When a proton is removed from an acid, the resulting species is termed that acid's conjugate base. When the proton is accepted by a base, the resulting species is termed that base's conjugate acid.{{GoldBookRef|title=conjugate acid–base pair|file=C01266}} In other words, acids act as proton donors and bases act as proton acceptors according to the following equation:
underset{acid}{HA} + underset{base}{B} underset{conjugated base}{A^-} + underset{conjugated acid}{HB+}
The reverse reaction is possible, and thus the acid/base and conjugated base/acid are always in equilibrium. The equilibrium is determined by the acid and base dissociation constants (Ka and Kb) of the involved substances. A special case of the acid-base reaction is the neutralization where an acid and a base, taken at exactly same amounts, form a neutral salt.Acid-base reactions can have different definitions depending on the acid-base concept employed. Some of the most common are:
  • Arrhenius definition: Acids dissociate in water releasing H3O+ ions; bases dissociate in water releasing OH− ions.
  • Brønsted-Lowry definition: Acids are proton (H+) donors, bases are proton acceptors; this includes the Arrhenius definition.
  • Lewis definition: Acids are electron-pair acceptors, bases are electron-pair donors; this includes the Brønsted-Lowry definition.


(File:Chemical precipitation diagram.svg|thumb|Precipitation)Precipitation is the formation of a solid in a solution or inside another solid during a chemical reaction. It usually takes place when the concentration of dissolved ions exceeds the solubility limit{{GoldBookRef|title=precipitation|file=P04795}} and forms an insoluble salt. This process can be assisted by adding a precipitating agent or by removal of the solvent. Rapid precipitation results in an amorphous or microcrystalline residue and slow process can yield single crystals. The latter can also be obtained by recrystallization from microcrystalline salts.ENCYCLOPEDIA, Wingender, Jörg, Ortanderl, Stefanie, Ausfällung, Römpp Chemie-Lexikon, Thieme Medical Publishers, Thieme, July 2009,

Solid-state reactions

Reactions can take place between two solids. However, because of the relatively small diffusion rates in solids, the corresponding chemical reactions are very slow in comparison to liquid and gas phase reactions. They are accelerated by increasing the reaction temperature and finely dividing the reactant to increase the contacting surface area.ENCYCLOPEDIA, Erwin Riedel, Meyer, H. Jürgen, Modern Inorganic Chemistry, Festkörperchemie, 3rd,weblink German, Walter de Gruyter, de Gruyter, 2007, 978-3-11-019060-1, 171,

Reactions at the solid|gas interface

Reaction can take place at the solid|gas interface, surfaces at very low pressure such as ultra-high vacuum. Via scanning tunneling microscopy, it is possible to observe reactions at the solid|gas interface in real space, if the time scale of the reaction is in the correct range.JOURNAL, 10.1126/science.278.5345.1931, Atomic and Macroscopic Reaction Rates of a Surface-Catalyzed Reaction, Science, 278, 5345, 1931–4, 1997, Wintterlin, J., 9395392, 1997Sci...278.1931W, JOURNAL, 10.1021/ja302593v, Oxidation of an Organic Adlayer: A Bird's Eye View, Journal of the American Chemical Society, 134, 21, 8817–8822, 2012, Waldmann, T., Künzel, D., Hoster, H.E., Groß, A., Behm, R.J.R., 22571820, Reactions at the solid|gas interface are in some cases related to catalysis.

Photochemical reactions

File:Paterno-Buchi reaction.svg|thumb|In this Paterno–Büchi reaction, a photoexcited carbonyl group is added to an unexcited olefin, yielding an oxetaneoxetaneIn photochemical reactions, atoms and molecules absorb energy (photons) of the illumination light and convert into an excited state. They can then release this energy by breaking chemical bonds, thereby producing radicals. Photochemical reactions include hydrogen–oxygen reactions, radical polymerization, chain reactions and rearrangement reactions.Atkins, pp. 937–950Many important processes involve photochemistry. The premier example is photosynthesis, in which most plants use solar energy to convert carbon dioxide and water into glucose, disposing of oxygen as a side-product. Humans rely on photochemistry for the formation of vitamin D, and vision is initiated by a photochemical reaction of rhodopsin.ENCYCLOPEDIA, Kandori, Hideki, Retinal Binding Proteins, Dugave, Christophe, 2006,weblink Cis-trans Isomerization in Biochemistry, John Wiley & Sons, Wiley-VCH, 56, 978-3-527-31304-4, In fireflies, an enzyme in the abdomen catalyzes a reaction that results in bioluminescence.BOOK, Saunders, David Stanley, 2002,weblink Insect clocks, Third, Elsevier, Amsterdam, 179, 978-0-444-50407-4, Many significant photochemical reactions, such as ozone formation, occur in the Earth atmosphere and constitute atmospheric chemistry.


{{Further|Reaction Progress Kinetic Analysis}}(File:Activation energy.svg|thumb|right|Schematic potential energy diagram showing the effect of a catalyst in an endothermic chemical reaction. The presence of a catalyst opens a different reaction pathway (in red) with a lower activation energy. The final result and the overall thermodynamics are the same.)File:Pot catalytique vue de la structure.jpg|thumb|Solid heterogeneous catalysts are plated on meshes in ceramic catalytic converters in order to maximize their surface area. This exhaust converter is from a Peugeot 106Peugeot 106In catalysis, the reaction does not proceed directly, but through reaction with a third substance known as catalyst. Although the catalyst takes part in the reaction, it is returned to its original state by the end of the reaction and so is not consumed. However, it can be inhibited, deactivated or destroyed by secondary processes. Catalysts can be used in a different phase (heterogeneous) or in the same phase (homogeneous) as the reactants. In heterogeneous catalysis, typical secondary processes include coking where the catalyst becomes covered by polymeric side products. Additionally, heterogeneous catalysts can dissolve into the solution in a solid–liquid system or evaporate in a solid–gas system. Catalysts can only speed up the reaction – chemicals that slow down the reaction are called inhibitors.{{GoldBookRef|title=catalyst|file=C00876}}{{GoldBookRef|title=inhibitor|file=I03035}} Substances that increase the activity of catalysts are called promoters, and substances that deactivate catalysts are called catalytic poisons. With a catalyst, a reaction which is kinetically inhibited by a high activation energy can take place in circumvention of this activation energy.Heterogeneous catalysts are usually solids, powdered in order to maximize their surface area. Of particular importance in heterogeneous catalysis are the platinum group metals and other transition metals, which are used in hydrogenations, catalytic reforming and in the synthesis of commodity chemicals such as nitric acid and ammonia. Acids are an example of a homogeneous catalyst, they increase the nucleophilicity of carbonyls, allowing a reaction that would not otherwise proceed with electrophiles. The advantage of homogeneous catalysts is the ease of mixing them with the reactants, but they may also be difficult to separate from the products. Therefore, heterogeneous catalysts are preferred in many industrial processes.BOOK, Elschenbroich, Christoph, Organometallchemie, 6th, Vieweg+Teubner Verlag, Wiesbaden, 2008, 978-3-8351-0167-8, 263,

Reactions in organic chemistry

In organic chemistry, in addition to oxidation, reduction or acid-base reactions, a number of other reactions can take place which involve covalent bonds between carbon atoms or carbon and heteroatoms (such as oxygen, nitrogen, halogens, etc.). Many specific reactions in organic chemistry are name reactions designated after their discoverers.


In a substitution reaction, a functional group in a particular chemical compound is replaced by another group.{{JerryMarch}} These reactions can be distinguished by the type of substituting species into a nucleophilic, electrophilic or radical substitution.{{multiple image | direction = vertical | image1 = SN1 reaction mechanism.png|width1 = 300|image2 = SN2 reaction mechanism.png|width2 = 300| caption1 = SN1 mechanism| caption2 = SN2 mechanism}}In the first type, a nucleophile, an atom or molecule with an excess of electrons and thus a negative charge or partial charge, replaces another atom or part of the "substrate" molecule. The electron pair from the nucleophile attacks the substrate forming a new bond, while the leaving group departs with an electron pair. The nucleophile may be electrically neutral or negatively charged, whereas the substrate is typically neutral or positively charged. Examples of nucleophiles are hydroxide ion, alkoxides, amines and halides. This type of reaction is found mainly in aliphatic hydrocarbons, and rarely in aromatic hydrocarbon. The latter have high electron density and enter nucleophilic aromatic substitution only with very strong electron withdrawing groups. Nucleophilic substitution can take place by two different mechanisms, SN1 and SN2. In their names, S stands for substitution, N for nucleophilic, and the number represents the kinetic order of the reaction, unimolecular or bimolecular.BOOK, Hartshorn, S.R.,weblink Aliphatic Nucleophilic Substitution, Cambridge University Press, London, 1973, 978-0-521-09801-4, 1, {{multiple image | direction = vertical| align = right| width = 120| image1= Walden-inversion-3D-balls.png
SN2 reaction>SN2 reaction. The nucleophile is green and the leaving group is red|image2=SN2-Walden-before-and-after-horizontal-3D-balls.png|caption2=SN2 reaction causes stereo inversion (Walden inversion)}}The SN1 reaction proceeds in two steps. First, the leaving group is eliminated creating a carbocation. This is followed by a rapid reaction with the nucleophile.JOURNAL, Bateman, Leslie C., Church, Mervyn G., Hughes, Edward D., Ingold, Christopher K., Taher, Nazeer Ahmed, 10.1039/JR9400000979, 188. Mechanism of substitution at a saturated carbon atom. Part XXIII. A kinetic demonstration of the unimolecular solvolysis of alkyl halides. (Section E) a general discussion, 1940, Journal of the Chemical Society, 979, In the SN2 mechanism, the nucleophile forms a transition state with the attacked molecule, and only then the leaving group is cleaved. These two mechanisms differ in the stereochemistry of the products. SN1 leads to the non-stereospecific addition and does not result in a chiral center, but rather in a set of geometric isomers (cis/trans). In contrast, a reversal (Walden inversion) of the previously existing stereochemistry is observed in the SN2 mechanism.Brückner, pp. 63–77Electrophilic substitution is the counterpart of the nucleophilic substitution in that the attacking atom or molecule, an electrophile, has low electron density and thus a positive charge. Typical electrophiles are the carbon atom of carbonyl groups, carbocations or sulfur or nitronium cations. This reaction takes place almost exclusively in aromatic hydrocarbons, where it is called electrophilic aromatic substitution. The electrophile attack results in the so-called σ-complex, a transition state in which the aromatic system is abolished. Then, the leaving group, usually a proton, is split off and the aromaticity is restored. An alternative to aromatic substitution is electrophilic aliphatic substitution. It is similar to the nucleophilic aliphatic substitution and also has two major types, SE1 and SE2Brückner, pp. 203–206(File:Electrophilic aromatic substitution.svg|center|thumb|648px|Mechanism of electrophilic aromatic substitution){{clear}}In the third type of substitution reaction, radical substitution, the attacking particle is a radical. This process usually takes the form of a chain reaction, for example in the reaction of alkanes with halogens. In the first step, light or heat disintegrates the halogen-containing molecules producing the radicals. Then the reaction proceeds as an avalanche until two radicals meet and recombine.Brückner, p. 16
;X. + R-H -> X-H + R. ;R. + X2 -> R-X + X. Reactions during the chain reaction of radical substitution

Addition and elimination

The addition and its counterpart, the elimination, are reactions which change the number of substituents on the carbon atom, and form or cleave multiple bonds. Double and triple bonds can be produced by eliminating a suitable leaving group. Similar to the nucleophilic substitution, there are several possible reaction mechanisms which are named after the respective reaction order. In the E1 mechanism, the leaving group is ejected first, forming a carbocation. The next step, formation of the double bond, takes place with elimination of a proton (deprotonation). The leaving order is reversed in the E1cb mechanism, that is the proton is split off first. This mechanism requires participation of a base.Brückner, p. 192 Because of the similar conditions, both reactions in the E1 or E1cb elimination always compete with the SN1 substitution.Brückner, p. 183{{multiple image| align = center| image1 = E1-mechanism.svg| width1 = 400| alt1 = | caption1 = E1 elimination| image2 = E1cb-mechanism.svg| width2 = 400| alt2 = | caption2 = E1cb elimination| footer = }}{{clear}}(File:E2-mechanism.svg|thumb|300px|E2 elimination)The E2 mechanism also requires a base, but there the attack of the base and the elimination of the leaving group proceed simultaneously and produce no ionic intermediate. In contrast to the E1 eliminations, different stereochemical configurations are possible for the reaction product in the E2 mechanism, because the attack of the base preferentially occurs in the anti-position with respect to the leaving group. Because of the similar conditions and reagents, the E2 elimination is always in competition with the SN2-substitution.Brückner, p. 172(File:HBr-Addition.png|thumb|300px|Electrophilic addition of hydrogen bromide)The counterpart of elimination is the addition where double or triple bonds are converted into single bonds. Similar to the substitution reactions, there are several types of additions distinguished by the type of the attacking particle. For example, in the electrophilic addition of hydrogen bromide, an electrophile (proton) attacks the double bond forming a carbocation, which then reacts with the nucleophile (bromine). The carbocation can be formed on either side of the double bond depending on the groups attached to its ends, and the preferred configuration can be predicted with the Markovnikov's rule.Wiberg, pp. 950, 1602 This rule states that "In the heterolytic addition of a polar molecule to an alkene or alkyne, the more electronegative (nucleophilic) atom (or part) of the polar molecule becomes attached to the carbon atom bearing the smaller number of hydrogen atoms."{{GoldBookRef|title=Markownikoff rule|file=M03707}}If the addition of a functional group takes place at the less substituted carbon atom of the double bond, then the electrophilic substitution with acids is not possible. In this case, one has to use the hydroboration–oxidation reaction, where in the first step, the boron atom acts as electrophile and adds to the less substituted carbon atom. At the second step, the nucleophilic hydroperoxide or halogen anion attacks the boron atom.Brückner, p. 125While the addition to the electron-rich alkenes and alkynes is mainly electrophilic, the nucleophilic addition plays an important role for the carbon-heteroatom multiple bonds, and especially its most important representative, the carbonyl group. This process is often associated with an elimination, so that after the reaction the carbonyl group is present again. It is therefore called addition-elimination reaction and may occur in carboxylic acid derivatives such as chlorides, esters or anhydrides. This reaction is often catalyzed by acids or bases, where the acids increase by the electrophilicity of the carbonyl group by binding to the oxygen atom, whereas the bases enhance the nucleophilicity of the attacking nucleophile.BOOK, Latscha, Hans Peter, Kazmaier, Uli, Klein, Helmut Alfons, Organische Chemie: Chemie-basiswissen II, 2, 6th, German, Springer Science+Business Media, Springer, 2008, 978-3-540-77106-7, 273, (File:H-Add-El.Mechanismus.PNG|thumb|center|500px|Acid-catalyzed addition-elimination mechanism){{clear}}Nucleophilic addition of a carbanion or another nucleophile to the double bond of an alpha, beta unsaturated carbonyl compound can proceed via the Michael reaction, which belongs to the larger class of conjugate additions. This is one of the most useful methods for the mild formation of C–C bonds.BOOK, 2004, 10.1002/0471264180, Organic Reactions, 978-0-471-26418-7, WEB, Chapter 18: Enols and Enolates — The Michael Addition reaction, Hunt, Ian, University of Calgary,weblink Brückner, p. 580Some additions which can not be executed with nucleophiles and electrophiles, can be succeeded with free radicals. As with the free-radical substitution, the radical addition proceeds as a chain reaction, and such reactions are the basis of the free-radical polymerization.BOOK, Lechner, Manfred, Gehrke, Klaus, Nordmeier, Eckhard, Macromolecular Chemistry, 3rd, Birkhäuser, Basel, 2003, 978-3-7643-6952-1, 53–65,

Other organic reaction mechanisms

(File:Cope Rearrangement Scheme.png|left|thumb|The Cope rearrangement of 3-methyl-1,5-hexadiene){{multiple image | direction = vertical| align = right| width = 220| image1= Diels Alder Mechanismus.svg|caption1=Mechanism of a Diels-Alder reaction| image2= Diels Alder Orbitale.svg|caption2=Orbital overlap in a Diels-Alder reaction}}In a rearrangement reaction, the carbon skeleton of a molecule is rearranged to give a structural isomer of the original molecule. These include hydride shift reactions such as the Wagner-Meerwein rearrangement, where a hydrogen, alkyl or aryl group migrates from one carbon to a neighboring carbon. Most rearrangements are associated with the breaking and formation of new carbon-carbon bonds. Other examples are sigmatropic reaction such as the Cope rearrangement.BOOK, Fox, Marye Anne, Whitesell, James K.,weblink Organic chemistry, Third, Jones & Bartlett Learning, Jones & Bartlett, 2004, 978-0-7637-2197-8, 699, Cyclic rearrangements include cycloadditions and, more generally, pericyclic reactions, wherein two or more double bond-containing molecules form a cyclic molecule. An important example of cycloaddition reaction is the Diels–Alder reaction (the so-called [4+2] cycloaddition) between a conjugated diene and a substituted alkene to form a substituted cyclohexene system.JOURNAL, 460, 98–122, 1928, 10.1002/jlac.19284600106, Justus Liebig's Annalen der Chemie, Synthesen in der hydroaromatischen Reihe, K., Alder, Diels, O., Whether a certain cycloaddition would proceed depends on the electronic orbitals of the participating species, as only orbitals with the same sign of wave function will overlap and interact constructively to form new bonds. Cycloaddition is usually assisted by light or heat. These perturbations result in different arrangement of electrons in the excited state of the involved molecules and therefore in different effects. For example, the [4+2] Diels-Alder reactions can be assisted by heat whereas the [2+2] cycloaddition is selectively induced by light.Brückner, pp. 637–647 Because of the orbital character, the potential for developing stereoisomeric products upon cycloaddition is limited, as described by the Woodward–Hoffmann rules.JOURNAL, 10.1021/ja01080a054, Stereochemistry of Electrocyclic Reactions, Journal of the American Chemical Society, 87, 2, 395–397, 1965, Woodward, R.B., Hoffmann, R.,

Biochemical reactions

(File:Induced fit diagram.svg|thumb|left|380px|Illustration of the induced fit model of enzyme activity)Biochemical reactions are mainly controlled by enzymes. These proteins can specifically catalyze a single reaction, so that reactions can be controlled very precisely. The reaction takes place in the active site, a small part of the enzyme which is usually found in a cleft or pocket lined by amino acid residues, and the rest of the enzyme is used mainly for stabilization. The catalytic action of enzymes relies on several mechanisms including the molecular shape ("induced fit"), bond strain, proximity and orientation of molecules relative to the enzyme, proton donation or withdrawal (acid/base catalysis), electrostatic interactions and many others.BOOK, Karlson, Peter, Doenecke, Detlef, Koolman, Jan, Fuchs, Georg, Gerok, Wolfgang, Karlson Biochemistry and Pathobiochemistry, 16th,weblink German, Thieme Medical Publishers, Thieme, 2005, 978-3-13-357815-8, 55–56, The biochemical reactions that occur in living organisms are collectively known as metabolism. Among the most important of its mechanisms is the anabolism, in which different DNA and enzyme-controlled processes result in the production of large molecules such as proteins and carbohydrates from smaller units.{{GoldBookRef|title=anabolism|file=A00314}} Bioenergetics studies the sources of energy for such reactions. An important energy source is glucose, which can be produced by plants via photosynthesis or assimilated from food. All organisms use this energy to produce adenosine triphosphate (ATP), which can then be used to energize other reactions.


(File:Velp-thermitewelding-1.jpg|thumb|Thermite reaction proceeding in railway welding. Shortly after this, the liquid iron flows into the mould around the rail gap)Chemical reactions are central to chemical engineering where they are used for the synthesis of new compounds from natural raw materials such as petroleum and mineral ores. It is essential to make the reaction as efficient as possible, maximizing the yield and minimizing the amount of reagents, energy inputs and waste. Catalysts are especially helpful for reducing the energy required for the reaction and increasing its reaction rate.BOOK, Emig, Gerhard, Klemm, Elias, Technical Chemistry, 5th, German, Springer Science+Business Media, Springer, 2005, 978-3-540-23452-4, 33–34, JOURNAL, 10.1126/science.1962206, The atom economy – a search for synthetic efficiency, Science, 254, 5037, 1471–1477, 1991, Trost, B., 1962206, 1991Sci...254.1471T, Some specific reactions have their niche applications. For example, the thermite reaction is used to generate light and heat in pyrotechnics and welding. Although it is less controllable than the more conventional oxy-fuel welding, arc welding and flash welding, it requires much less equipment and is still used to mend rails, especially in remote areas.ENCYCLOPEDIA, John J. McKetta, Weismantel, Guy E, 1999,weblink Encyclopedia of Chemical Processing and Design, 67, CRC Press, 109, 978-0-8247-2618-8,


Mechanisms of monitoring chemical reactions depend strongly on the reaction rate. Relatively slow processes can be analyzed in situ for the concentrations and identities of the individual ingredients. Important tools of real time analysis are the measurement of pH and analysis of optical absorption (color) and emission spectra. A less accessible but rather efficient method is introduction of a radioactive isotope into the reaction and monitoring how it changes over time and where it moves to; this method is often used to analyze redistribution of substances in the human body. Faster reactions are usually studied with ultrafast laser spectroscopy where utilization of femtosecond lasers allows short-lived transition states to be monitored at time scaled down to a few femtoseconds.Atkins, p. 987

See also

{{BranchesofChemistry}}{{Footer energy}}




  • BOOK, Atkins, Atkins, Peter W., Julio de Paula, Physical Chemistry, 4th, Wiley-VCH, Weinheim, 2006, 978-3-527-31546-8,
  • BOOK, Brock, Brock, William H.,weblink Viewegs Geschichte der Chemie, German, Vieweg+Teubner Verlag, Vieweg, Braunschweig, 1997, 978-3-540-67033-9,
  • BOOK, Bruckner, Brückner, Reinhard, Reaktionsmechanismen, 3rd, German, Spektrum Akademischer Verlag, München, 2004, 978-3-8274-1579-0,
  • BOOK, Wiberg, Wiberg, Egon, Wiberg, Nils and Holleman, Arnold Frederick,weblink Inorganic chemistry, Academic Press, 2001, 978-0-12-352651-9,
  • EB1911, Chemical Action, 6, 26–33, 1,
{{Authority control}}

- content above as imported from Wikipedia
- "chemical reaction" does not exist on GetWiki (yet)
- time: 4:39pm EST - Fri, Dec 06 2019
[ this remote article is provided by Wikipedia ]
LATEST EDITS [ see all ]
Eastern Philosophy
History of Philosophy
M.R.M. Parrott